AUCTION DAY:		Thursday, March 18th, 10am
Preview Day:		Wednesday, March 17th, 9am – 5pm
Location:		2961 Shushwap Road, Kamloops, BC (East of Kamloops, next to Lafarge plant)

Contact:		Ken Ardiel
Phone:		(604) 530-9351
Fax:		(604) 530-0194
E-mail:		kardiel@tradewestsales.com

Last updated: Saturday, March 6, 2010 - 10:28 PM Pacific Time

Download auction brochure
Adobe PDF (706 KB)

PLANERS & MOULDERS

Stetson Ross 6 head Planer, Model 6-10-A1; 10 knife; 15”W x 8”H capacity; 400FPM; DC drive; Motors: 35HP spindle drives; 460V; s/n 11 04848-002; 15” 10k top head (Formerly of Faulkner Wood Specialties, Surrey , BC); Note: Planer available for immediate sale prior to auction. If included in auction, high bid is subject to owner approval.

STETSON ROSS 6 HEAD PLANER

Wadkin 7 head moulder; Model GA-777; s/n 92592; 4” x 8” Rough infeed capacity; Motors: (2) 15HP Bottom; (2) 7.5HP Side; 10 & 15HP top; Control panel; 575V •
Wadkin 6 head moulder; Model GA-777; 4” x 8” Rough infeed capacity •
1991 Weinig Profimat 22 5 Head Moulder; 4” x 9” infeed rough capacity.

Complete Moulder Line
(Located in Chase, BC, 35 minutes from the Adwood auction site. Auction will move to this site immediately after the Adwood auction)

Line Includes: 3 Arm x 10’ Tilt Hoist, mechanical, 10HP drive; 4’ x 8’H arms • 8” x 17’ Stick belt & drive • 5 Run Single Trim Table, 16’ x 12’ deck, lugged chain; w/ drive • 10” x 20’ incline Waste conveyor & drive • Yates 4 Head Planer, 3” x 8” capacity; Variable speed controller, electrics, hydraulics; 208/230/460V; Spindle Drives: (2) HP Side; 15 HP Top; 10HP Bottom; 10HP feed rolls • Spiral infeed rolls, 5 rolls, 12’ x 24” rollcase; Yates 2 pineapple roll infeed • 10” x 21’ Outfeed belt & drive • 4 Run Landing deck, 10’ x 7’ (no chain) • 4 Run Landing Deck, 10’ x 10’ 7.5HP belt drive • Electrics: Siemens 600 Amp Main, 600V; Cat #ID366 • (2) Siemens 200 amp, (1) 100 amp switches; (2) Gutters • Square D & Siemens 30 & 60 amp switches; (2) Gutters; Siemens 5 Button Stop/starts • GE CR1062-K1 Dust & Watertight switches; 10HP Starter.

YATES 4 HEAD MOULDER

WADKIN GA-777 7 HEAD MOULDER

PLANER MILL ELECTRICS

3 ARM 10' TILT HOIST

5 RUN TRIM TABLE

10" X 21' MOULDER OUTFEED BELT

MOULDER ELECTRICS

LUMBER REMAN

Wadkin Bursgreen BSM 69221 Multirip Saw, 3” x 24” open sided bed; 220/440V • Cosmec 50HP Multi-rip Saw, 575V; 20cm height x 26” open sided bed • Ogam P-280 Multi-rip saw; 12” x 3-3/4”; 50HP 480V • Dimptner 2 Saw Optimizing Line; 2 Saw stations; Scanner station; controls, infeed & outfeed belts • Producto 81L60 Circular Resaw, s/n 2760288; 50HP arbour, 15HP HPU 480V; Max 6” x 6” capacity; Set up for 2” x 6” & 2” x 8” ripping to 1” boards; Note: Major rebuild just completed: New bearings, chains, sprockets, linear bearings and shafts on tensioning; HPU cleaned & resealed • Producto 9” x 20’ resaw infeed belt, c/w drive.

PRODUCTO 81L60 CIRC. RESAW

PRODUCTO 9” x 20’ INFEED BELT

WADKIN BURSGREEN
BSM-69221 RIP SAW

COSMEC 50HP MULTIRIP SAW

OGAM PO-280 MULTIRIP SAW

CHIPPING & DUST COLLECTION

Precision 75HP chip pack system; Size 38:09 chipper, 5’ x 6’ screen; System controls; 10” I.D. blower pipe; /n 01042 • Jacobson 2424 Hammer Hog, 100HP; 12” x 15” top feed hopper; side discharge to 30” blower • Kraemer S52-12 Silo Baghouse, 220 bags, 10’ x 16’ x 10’H • Murphy Baghouse, 26 bag capacity; 20HP x 36” blower; Baghouse 66” diameter x 12’H • Twin 17 Unit Shavings Bins, c/w 3HP hydraulic power unit • 12’ Diameter Cyclone • Blowers: Nelson Size 50 Type WS, 50HP 440V; 17” x 56” • Nelson Size 30, Type WSS; 40HP; 16” x 52” • Chicago 36: blower, 48” x 14” (no motor) • 40HP shavings blower, w/ feed hopper; 15.5” x 24” diameter blower; 550V • (2) 50HP 575V, 16” x42”; 20HP Blower, 36” x 12”; 208/220/440V • 5HP x 24” blower, 230/460V • Vancouver Blower 15HP, Size 30; 30” x 11”; 230/460V.

PRECISION 75HP CHIP PACK

JACOBSON 2424 HAMMER HOG

KRAEMER S52-12 SILO BAGHOUSE

Kraemer 81 Bag Baghouse
6’ x 6’ x 8’H

MURPHY 26 BAG BAGHOUSE

(2) 17 UNIT SHAVINGS BINS

12' CYCLONE

NELSON 50HP BLOWER

NELSON 40HP BLOWER

CHICAGO 36" BLOWER

40HP SHAVINGS BLOWER

50HP BLOWER

20HP BLOWER

24" 5HP BLOWER

VANCOUVER 15HP BLOWER

GENERAL EQUIPMENT

Automatic Pallet Stretch Wrapper, 87” Vertical column, w/ 42” x 80” rollcase turntable; controls; Leeson 1HP DC motor • Electric Scissor Lift, 18” x 48” platform • Twin 3HP hydraulic power unit; 208/220/440V • Portable Fuel Tank; w/ FillRite 15GPM pump • 8’ Forklift Snow Blade, 2 Way, 40” centres • 1996 Becker 5.5KW pump, Model VTLF250; 950-1150GPM.

PALLET STRETCH WRAPPER
WITH ROLLCASE TURNTABLE

ELECTRIC SCISSOR LIFT

TWIN 3HP HPU

8' FORKLIFT SNOW BLADE

1996 BECKER 5.5KW PUMP

WOODWORKING EQUIPMENT

1998 Homag Double End Tenoner, Type FL67/25/2, 480V; s/n 0-203-08-119; Belt sanding, horizontal & profile sanding, shapers, scoring saw, hogger • SCM D-80K Double End Tenoner; Trims to 120” x 4”; (4) heads, all rotate 90 deg.; Compact design • 1998 RYE Rotary Shaper, Type R80E-MS; 68” table diameter; Dual overhead shaper heads; Cutting Capacities: Square: 24” – 56”; Circle: 24” – 80”; Rectangle: Min 24” x 48” - 35.5” x 71”; 9,000 RPM; Max rectangle; w/ (2) 4 ½” edge belt sanders; s/n 160; 480V; Note: This tenoner available for immediate sale prior to auction. If included in auction, high bid is subject to owner approval • 6 Bar Chain Mortiser • JKO HM-300 Hauncher/ Dovetailer; 16”W x 8”H capacity; s/n 2223; 440V; Air over electric; 3 blade clusters • Irvington Chop saw, w/ 15’ infeed & 12’ outfeed rollcase, w/ stops • (4) 30” Wall fans • MacGregor 12” table saw.

'98 HOMAG DOUBLE END TENONER

SCM D-80K P.E.T. DOUBLE END TENONER

JKO HM-300 BLOCK
HAUNCHER-DOVETAILER

RYE R80E-MS ROTARY SHAPER

6 BAR CHAIN MORTISER

COMPRESSORS

Compair 30HP Rotary Compressor; Model C222.9.2 Cyclon 222; s/n C63A8184ASP6894; 125psi; 460V • DeVilbiss 15HP V-head compressor • (2) DeVilbiss 10HP V-head compressors, as new • 5HP Vertical tank compressor • 7.5HP Compressor, 230/460V, w/ tank • DeVilbiss 7.5HP compressor • DeVilbiss 5HP V-head compressor; 230V; c/w tank • Pneumatic Products Heat-Les Dual Chamber Air Dryer; 150 psig; s/n 9911232 • Ingersoll-Rand T30 compressor tank; 200psi; 66” x 24” diameter • Eagle V-head compressor & 200 psi tank, 24” x 68”; no motor.

COMPAIR 30HP ROTARY
COMPRESSOR

PNEUMATIC PRODUCTS
150PSIG AIR DRYER

DEVILBISS V-HEAD COMPRESSOR

7.5HP COMPRESSOR

DEVILBISS 7.5HP COMPRESSOR

ELECTRICAL

(3) 1991 Onan 500kVA Transformers, HV: 24,940GRDY/14,400V – LV: 600Y/347V • Burton 75KVA Transformer, 2108Y/120V • Burton 25 KVA 1 PH Transformer, 240/480V – 120/240V • Rosemount 4001 Kiln Alarm Monitor; Microprocessor for 24 inputs • Motors : 75HP 575V; 100HP 575V 1180rpm; 50HP 240V motor w/ 1/3HP blower; Perske 28kw 60kVA Drive, 480V; CGE 75HP 460V 1770 rpm; Westinghouse 10HP 220/440V 3,500 RPM; 7.5HP 220V; 25HP 208/230/460V; (2) English 15HP 208/220/440V; Square D 400 amp switch • Pallets of Teck Cable; More...

ROSEMOUNT 4001 KILN
ALARM MONITOR

50HP 240V DRIVE, COOLER FAN

75HP MOTOR

100HP MOTOR

28 KW 60KVA DRIVE

SHOP EQUIPMENT

1993 Frejoth 12” x 30” gap bed engine lathe; Model F1-900AEG; 6” 3 jaw chuck; 1.4” spindle bore; 48” bed • Carolina metal cutting 8” x 14” horizontal bandsaw, Model LDC; 110V; Near new • Metal Cutting Horizontal Band Saw, 7” x 12” capacity • Miller SR300 DC Welder • Hanchett GK36 Flat Knife Grinder; 38” knife clamp; 24” x 1.5” stone; 3HP 220/440V.

FREJOTH 6" X 30" LATHE

CAROLINA HORIZONTAL
METAL CUTTING BANDSAW

METAL BANDSAW (2)

MILLER SR300 WELDER

HANCHETT 48" FLAT KNIFE GRINDER

ROLLING STOCK

Forklifts:

2004 Cat DP115 25,000 LB cap, 199/161" std mast, side shift, fork positioned, 46" lumber forks, enclosed cab, diesel powered, s/n 4DP10056
2001 Mitsubishi FGC40KS 8,000LB; s/n AF8700510; enclosed cab; Full free triple mast; Side shift; LPG
Cat GP40 8,000 LB cap.148" std mast, side shift, propane powered, Powershift transmission
2000 Toyota 6,000LB Forklift; LPG;
Bullmoose C824 6,000LB Forklift, Diesel, s/n 3718; Good condition
2001 Hyster H30 3,000 LB cap, 188" full free triple mast, side shift, LPG, s/n E001H01580Y
Mitsubishi 4,000LB forklift; dual mast; LPG

Manlift:

JLG 40RTS Man Lift, 3700 rental hours, propane powered, 4 WD, 40' lift height, 4' deck extension, s/n 200044276

'04 Cat DP115 25,000 LB Forklift

’01 MITSUBISHI 8,000LB FORKLIFT

Cat GP40 8,000LB Forklift

BULLMOOSE 624 6,000LB
DIESEL FORKLIFT

'01 Hyster H30 3,000LB Forklift

JLG 40RTS 4WD ManLift

TOOLS

Hand, power and air tools.