AUCTION DAY:		WEDNESDAY, SEPTEMBER 15TH – 9AM (Auction may continue on Thursday, Sept. 16th at 9am. Please check our website for updates.)
Preview Day:		Tuesday, September 14th, 9am – 5pm
Location:		909 Hwy 99, Lillooet, BC

Contact:		Ken Ardiel
Phone:		(604) 530-9351
Fax:		(604) 530-0194
E-mail:		kardiel@tradewestsales.com

Contact:		Matt Ardiel
Phone:		(604) 530-9351
Fax:		(604) 530-0194
E-mail:		mtardiel@tradewestsales.com

Last updated: Monday, September 13, 2010 - 7:14 PM Pacific Time

Download auction catalogue
Adobe PDF (254 KB)

Download auction brochure
Adobe PDF (1 MB)

DIRECTIONS

From Vancouver, drive Hwy 99 through Squamish, Whistler, Pemberton and on to Lillooet. From the US Border or the Fraser Valley, take either the same route, or take Hwy #1 through Hope and up the Fraser Canyon. Exit Hwy #1 at Lytton, and drive north along the scenic Fraser River on Hwy #12 to Lillooet. Once in Lillooet, the Bridgeside auction site is on Hwy #99, just south of the 23 Camels Bridge spanning the Fraser River. Either route is approx. 3.5 hours drive time.

REAL ESTATE

23 ACRE INDUSTRIAL PROPERTY FOR SALE/LEASE

Over 73,000 sq. Ft. Whse/Mfg Buildings

Contact Ken Ardiel at 604.530.9351

PLANERS & MOULDERS

Woods 415M Planer, 8” x 16”; Top, bottom, side heads & profiler; Variable Speed drives; 24’ x 16” Outfeed belt conveyor; 18’ x 16” outfeed belt conveyor; 6’ x 28”W Belt conveyor; Wagner continuous
flow moisture meter, w/ in-line sensor & colour spray unit • Stetson-Ross Infeed Rolls & Bridge, spiral rolls, rebuilt, re-chromed, 5HP 230/460; s/n 4514; hydraulic roll positioning; air tensioning; Paid $29,000 in 2008, never installed • Wadkin FBP9024 5 Head Moulder/ Matcher, 5” x 12”; s/n 89296 • 10’ Infeed rollcase, w/ 10 – 3” & 4” diameter, w/ pineapple feed roll • Pinheiro 24” double headed surface planer/Multi-rip saw, Model MF2-MS • Robinson 4 head Moulder, 4 x 8, jointed, w/ (10) hydrolock heads, 50mm.

WOODS 415M 8'' X 16'' PLANER

STETSON-ROSS REBUILT
PLANER INFEED

PINHIERO MF2 MS PLANER

WADKIN FBP9024 5 HEAD MOULDER

MOULDER INFEED ROLLS

SPIRAL INFEED ROLLS

PLANER BRIDGE WITH HOLDDOWNS

PLANER OUTFEED BELTS

FINGER JOINTERS

2000 Western Pneumatic PHOF Finger Jointer, manual corner; 3HP shaper; S/N FJ19517; 22’ trim press w/ (2) fixed end trim saws, & 2 saw precision secondary trim; Finger Jointer Infeed: 3 Run 3’ x 12’ Package Breakdown Transfer; Hydraulic Tilt Bin w/ (4) Runs 9” x 60” Rollcase; 12’ x 48” Belt Conveyor; (2) Norcan 15HP hydraulic power units; 230/460V; Western Main MCC , 480V 3ph; Variable Frequency Drive & Cabinet; PDC main Switch.

Grecon Combipact C-204 Finger Jointer comprised of: Feeding conveyor section, Model BF6/600/1500, with metal deck, 13’ x 5’W, steel moving bars, 5’ x 2’ belt conveyor; Feeding Station, Model A600/1500; 6.5’ long x 2’ wide, w/ reversing belt; Finger joint line with two shaper units, Model Combipact CP205/600/1500 w/ moving carriage, reversible belt, left & right clampdowns, pneumatic vibrating mechanism, hogging set for square cutting & cutting heads; Conveyor Belt, Model FB600/1500; 5’ x 2’ wide; Intermediate stop plate, Model ZS; Cross Transfer Unit, Model UK-205/600/1000; 39” x 2’W; (2) Tread-in Tracks, Model EKK-205; 11’ long each; Power Feed Attachment, Model VE-1 205/80; Trim Press, Model Conti-A-9300; 30’; Electric Length Counter, Model EL 10-10; (3) Cut-to-length Saws, c/w pneumatic lifts; GreControl control system; Glue Station, w/ powder mixing, (2) 1HP paddle wheel drive & pipe & fittings to automatic glue machine; Spares: (6) Spare motors & drives; New spare Grecon carriage travel track, New $1,200; Spare press roll; (2) Spare 30HP Grecon finger jointer motors.

WESTERN PNEUMATIC
PHOF FINGER JOINTER

3 STRAND BLOCK PACKAGE INFEED

BLOCK TILT INFEED BIN

BLOCK BIN INFEED SYSTEM

FINGER JOINTER INFEED

WESTERN MANUAL CORNER

WESTERN CROWDER

WESTERN END SHAPER SECTION

WESTERN TRIM PRESS

NORCAN 2 X 15HP
HYDRAULIC POWER UNIT

WESTERN SWITCH & CONTROL

VARIABLE FREQUENCY DRIVE

FINGER JOINTER PARTS ROOMS

GRECON BATCH INFEED

GRECON COMBIPACT SHAPER UNIT

GRECON FINGER JOINT LINE

GRECON DOUBLE END
TRIM & CARRIAGE

GRECON 30' TRIM PRESS

FINGER JOINTER GRECONTROL

GLUE MACHINE

OPTIMIZING LINES

Grecon 700-4 Optimizing Line, w/ scanner station & mark reader chop saw station; Max 4’ to 16’ timber length, 2” x 8” • Grecon 5’ x 15’ 6 strand infeed w/ 2 feed delay bars; (9) Vertical feed rolls • 4 Run Package Breakdown, 12’W x 11’L • Hydraulic 8,000LB Scissor Lift Tilt Hoist, 16’ Wide x 5’ arms • 4 Run Landing Deck, 12’W x 25’L • Stick Belt, 16” x 23’6”; SEW-Eurodrive 5HP 230/460V • 6 Run Lugged Chain Grecon Infeed Deck, 14’W x 30’L; 3HP SEW-Eurodrive • 6 Sets 12” x 18’ Rollcase • Optimizer Infeed Belt, 6”x 13’ w/ 3 holddown rolls • Block transfer belt, 8” x 40’ • Spare feedworks variable speed drive,
inc. brake, gearbox & motor; (2) Spare end rolls; Grecon 8” x 80’ Outfeed Belt w/ sensors, (8) blow-off stations, etc. • Grecon Uninstalled controls, scanner, (2) Chop stations, outfeed belt, infeed rolls, more.

GRECON SCANNER STATION

GRECON CHOP SAW STATION

GRECON GRECONTROL

OPTIMIZER INFEED SYSTEM

OPTIMIZER INFEED TRANSFER

GRECON OPTIMIZER OUTFEED BELT

OPTIMIZER LINE
PACKAGE BREAKDOWN

OPTIMIZER 12' TILT HOIST

STICK BELT

UNINSTALLED GRECON OPTIMIZER LINE COMPONENTS

GRECON INFEED ROLLS

ALUMINUM GRECON OUTFEED
& SUPPORTS CHANNEL

1 OF 2 GRECON CHOP STATIONS

GRECON SCANNER STANNER

GRECON ULTIMIZER
TRANSFER ROLLS

GRECON GRECONTROL

CUSTOM 12 BELT CONVEYOR BLOCK TRANSFER SYSTEM

Block Bin Tilt Hoist System; 96” wide x (4) 60” rollcase; hydraulic • 24” x 25’ Block belt • 65” x 10’ Belt • 60” x 40’ Belt • 24” x 40’ Belt • 24” x 70’ Belt • 12” x 20’ Belt • 16” x 80’ Belt • 8” x 30’ Belt • 48” x
20’ Belt • 10” x 50’ Belt • 10” x 60’ Belt • 40’ x 8” Belt • 19’ x 8” Belt • Scissor lift, 42” x 13’ • Mid-Oregon Edge Rip Saw (strip) • Kaman 25HP hydraulic power unit • (54) Lauzon Block Bins, 60“ x 67“ x 64“ High • Waste Conveyors: Belt waste conveyor from saw, 8” x 24’ 3HP gear drive • Belt waste conveyor, 13” x 62’, 3HP • Belt waste conveyors, 13” x 60’, 3HP • Overhead waste conveyor to chipper, 13” x 140’, 10HP • More...

BLOCK TILT DUMP SYSTEM

CHOP SAW & DROP BINS

12' SCISSOR LIFT

KAMAN 25HP HPU

72'' X 10' BELT CONVEYOR

PART VIEW OF BLOCK SORT

(54) STACKING BLOCK DUMP BINS

SAWS

Ripsaw Line: Pendu M4300 twin arbour ripsaw, 75HP 230/460V • Pendu 4 Strand Infeed Chain Transfer, 10’W x 25’6” • Povlsen 36” Twin Band Horizontal Resaw; Max rip 18” plank • Bypass Belt, 12” x 20 • 4 Run Green Chain, 10x30’ • Jump up chop saw • Hula saw, 7.5HP 230/460V • Hydraulic scissor lift, 3’ x 7’, w/ hydraulic power unit • 2 way camelback transfer, 6 run 16’W x 10’L • 6 Run transfer, 16’W x 21’L • Green chain, all on wheels w/ tracks, 3 run x 6’ x 24’ • MF 4 run green chain, 6’ x 45’ • MF 4 run green chain, 6’ x 12’ • Flighted waste conveyor, 26’ x 16”
Resaw Line: Stenner VHL 48” Resaw; s/n C442; Mechanical strain • (8) Spare band saw blades • 5 Strand Package Breakdown, 22’ x 15’ wide • 5 Arm 12’ Tilt Hoist, 65” arms; mechanical • 20’ x 9” Stick belt • Chevron Belt conveyor, 39” x 27’; w/ drive • 15HP Hydraulic power unit • 4 Strand landing deck 14’W x 35’L • 3 Strand chain transfer on wheels, 7’ x 25’6”; c/w motor & reducer • 5HP Hydraulic Power Unit; 208/230/460V
Trim Lines: 5 Head Trim Saw, End fixed, middle 3 heads movable; w/ cross infeed chains • 5 Strand Infeed Transfer, 15’L x 16’W H78 camelback chain • 12” x 18’ outfeed belt • 5 Run Green chain, 9’ x 54’; 3HP drive • 5 Run Green chain, 6’ x 30’; w/ motor & reducer • MF 27’ x 12” belt conveyor, w/ drive • 13 Strand Lugged chain trim table, 6 saw • Block Conveyor, 14” x 30’, w/ drive • Incline Conveyor, 14” x 30’ • Advance 4’ x 8’ x 8,000LB Scissor lift
(3) Trim Tables: 13 Strand 6 saw • 7 Strand, 2 adjustable saws • 4 Strand 3 Saw; 11” x 11”; adjustable middle saw
Chop Line: Precision 15RH jump up air chop saw • 72” x 16’ wide belt conveyor • 12” x 19’ incline belt conveyor • 10” x 18’ block conveyor • 48’ x 12” incline conveyor • 12” x 40’ incline conveyor • (3) Mid-Oregon Jump-up Air Chop Saws • (2) Precision 14-1106 14” chop saws • Mid-Oregon edge rip saw.

PENDU M4300 MULTIRIP SAW

STENNER 48'' RESAW

POVLSEN 36" TWIN BAND RESAW

4 HEAD TRIM SAW, 3 MOVABLE HEADS

MID-OREGON EDGE RIP SAW

13 RUN 6 SAW TRIM TABLE

2 SAW TRIM TABLE

2 SAW TRIM TABLE (3)

7 STRAND 2 SAW TRIM TABLE

HULA SAW

PRECISION 15RH CHOP SAW LINE

PRECISION 14'' CHOP SAW

MID-OREGON CHOP SAW

AIR JUMP UP CHOP SAW

MID-OREGON CHOP SAW

NUMEROUS CHOP SAWS

DEWALT 12" RADIAL ARM SAW

COMPRESSORS

(2) Kaesar AS36 rotary screw compressors, 30HP • DeVair 5HP compressor.

1 of 2 KAESAR 30HP
COMPRESSORS

PORTER CABLE 5HP COMPRESSOR

ROLLING STOCK

Wheel Loader: Cat 930 Wheel Loader, chip bucket; s/n 41K3997 • 2002 JLG 1932 Electric Scissorlift; 19’ reach x 32” platform
(10) Forklifts: Nissan 15,500LB Forklift; Diesel, 2 stage mast; Side shift • Cat P6500 7,000LB Forklift; s/n AT13F50336; 139” lift, 2 stage mast; LPG; Cushion tire, 5456 hrs • Toyota 30 6,000LB Forklift, Model 52-6FGU30; s/n 60304; Cushion tire, LPG, Side shift; 3 stage mast; 19,000 hrs • 2007 Cat C3000 3,000LB Forklift; 188” Full free triple mast; S/S; 42” forks; LPG • 2000 Cat GC45K-SWB 10,000LB Forklift; 160” double mast; S/S; 48” forks;SN# AT8701163 • 1991 Hyster S80XL-BC S 8,000LB Forklift; 194” Triple mast; S/S; 48” forks; LPG; S/N D004D02223T • 1985 Cat T50D 5,000LB Forklift; 173” Triple mast; 42” forks; LPG; S/N 8EB1963 • Toyota 45 10,000LB Forklift, S/N 5FG45-30013; 2 stage 197” mast; S/S, Pneumatic tires; Side shift • Nissan 6,000LB Forklift; A430V; 3 stage mast 187” lift; Side shift; LPG; Side shift • More... 2007 Heli FG35PS 3,500LB Forklift, LPG, Sideshift, 3ST.

CAT 930 WHEEL LOADER

2002 JLG 1932 Electric Scissorlift

'07 CAT 3,000LB FORKLIFT

'00 CAT GC45K 10,000LB FORKLIFT

CAT 9,000LB FORKLIFT

TOYOTA 30 6,000LB FORKLIFT

TOYOTA 15,500LB FORKLIFT

Hyster 8,000LB S80XL

CAT T50D 5,000LB FORKLIFT

NISSAN 5,000LB FORKLIFT

'07 Heli 3,500LB Forklift

ELECTRICS

(3) CGE 167KVA (500KVA) Transformers, 12.5KV Primary, 480V secondary; c/w poles, platform, shutoff; Note: Must be disconnected by A-Certified electrician or lineman • Beaver 30KVA transformer, 460/600V • Delta 45 KVA Transformer, 208/120V • MCCs: CCL 7 Section • CCL 6 Section • Square D 4 section; 1000amp horizontal, 300 amp vertical; 600V • Square D 3 section • Square D 3 section; 1,000 amp top bus • Allen-Bradley 2 bank • 3 section • Furnas System 89 2 Section; 600V 600 amp; 16 switches; Switchgear: (3) Square D 600 amp switches; (2) Square D 400 amp switches; Dozens of 30, 60, 100, 200 amp switches; Variable Speed Drives; Mill Teck Cable; More...

(3) CGE 167KVA TRANSFORMERS

CCL 7 SECTION MCC

CCL 6 SECTION MCC

4 SECTION MCC

3 SECTION MCC

1 OF 2 FURNAS 2 SECTION MCC'S

(3) SQUARE D 600 AMP SWITCHES

VARIAB LE SPEED DRIVES

WESTERN FINGER JOINTER
BAGHOUSE CONTROL

GRECON FINGER JOINTER
BAGHOUSE CONTROL

DC DRIVE

BALDOR DYNAMIC BRAKE

DRY KILNS

Nyle Dehumification Side Load Dry Kiln, Model CP7 control system; 75HP Compressor, Model HT084; Chamber capacity 50,000 fbm • Nyle Dehumification Side Load Dry Kiln, Model CP7 control system; (2) 25hp Compressors, Model HT77 Semi-hermetic 06E; Chamber capacity 50,000fbm • Custom Dehumidification Side Load Dry Kiln; Model CKD1-080-TXD; 5H80 open type compressor; 75hp Motor;
Cleaver Brooks P142-40 boiler, 1,339,000 BTU; Chamber Capacity 75,000fbm • Kiln Doors • Track, Kiln door stacker • More

NYLE SIDE LOAD DRY KILN

CUSTOM SIDE LOAD DRY KILN

1 OF 2 NYLE CP7 DRY
KILN CONTROLS

DRY KILN PUMPS

DRY KILN SYSTEMS

DRY KILN ELECTRICS

CLEAVER BROOKS
1,339MBTU BOILER

KILN CONTROLS

KILN DOOR STACKING SYSTEM

KILN STACK WEIGHTS

NYLE KILN PUMPS

TRANSFERS & CONVEYORS

Powered Rollcase 33’ x 48”, 6” Rolls • (2) Rollcases, 27’ x 48”, 6” rolls • Main Waste Conveyor; 15” x 108’ flighted chain, 5HP motor & reducer • 66” x 16’ Belt conveyor • 12” x 18’ Belt • 10” x 18’ Belt • 10”
x 48’ Belt • 10” x 40’ Belt • 24” x 15’ Belt • Mobile belt, 22” x 22’, 5HP 208/340/460V • Dozens more listed with lines.

HYDRAULIC 5 ARM 12' TILT HOIST

5 STRAND 22' X 15'W
PACKAGE BREAKDOWN

ADVANCE 8,000LB SCISSOR LIFT

30' HD ROLLCASE

MOBILE DOUBLE BELT CONVEYOR

30'' X 30' BELT CONVEYOR

MOBILE 3 STRAND GREEN CHAIN

4 STRAND GREEN CHAIN

MF 4 STRAND GREEN CHAIN

MF 4 STRAND GREEN
CHAIN EXTENSION

3 STRAND PENDU TRANSFER

PACKAGE BREAKDOWN & TILT HOIST

MOBILE BELT CONVEYOR

SPARE BOX CHAIN

GRINDING ROOM

Reform AR31 Type 4 Knife Grinder; 3100mm magnetic chuck; s/n 6356; 380V • Weinig R935 Profile Grinder; s/n 935-411, 230V • Weinig R-934 profile grinder, s/n 83598 • Wadkin NX 276 Profile Grinder; S/N 89157 • Foley 357 Saw Sharpener, s/n 100130 • Armstrong 6012 Saw Sharpener • Lion 2500 Test Bench • ECK Millwright SBK-010 Oven, s/n 00104, 120/350V • Peerless Binks Pressure Vessel • Benchstar 16 Drill Press • Friction Cut-off Saw • 40+ Moulder Heads; 50mm & 1 13/16” • Finger jointer heads • Saw Blades for Band saws, chop saws, trim saws, moulders • Spacers • Yates 200 Setup
Stand; Finger jointer setup stand; Dip tank & hood.

WEINIG R935 PROFILE GRINDER

WADKIN NX522 PROFILE GRINDER

REFORM AR31 GRINDER

WADKIN NX276 PROFILE GRINDER

ARMSTRONG 6012 SAW SHARPENER

FOLEY 357 GRINDER

YATES 200 SETUP STAND

FINGER JOINTER HEAD SETUP STAND

DIP TANK

PART VIEW OF MOULDER
& PLANER HEADS

HOIST SYSTEM OVER GRINDER

HEAD STAND

LION 2500 TEST BENCH

SPARE SAW BLADES

GREASE GUNS

CHIPPER BLADES & STAND

CHIPPING & DUST SYSTEMS

1995 VKB Bruks 812CS 4 Knife 31.5” Drum Chipper, top feed, bottom discharge; Order 8080/5 • Precision 5’ x 5’ chip screen • IME 65 Unit Shavings Bin, top loading, spreading auger, 7.5HP motor;
hydraulic bottom gates • IME 40 Unit Shavings/Chip Bin; top loading, spreading auger; 7.5HP; hydraulic bottom gates • 15HP hydraulic power unit • Tarping station • Kraemer Baghouse, Model B-21- 30 Arr #6; 30hp blower @ 480v; 81 bags x 8” diameter x 72”; 3/4 hp shaker; 1 ½ hp rotary air lock; Silencer; Structural supports for 10’ clearance to ground • NU-TECH 10,000 CFM Baghouse, 8’ x 8’ x 20’; (81) Bags; 30HP blower • Grecon Baghouse Control • Baghouse Control (Western) & PLC • 36” - 48” Blowers, 50HP • 18” x 5HP Blower • Blower over planer • (3) 10’ & (1) 6’Cyclones • 50’ x 24” incline box chain conveyor • 150’ x 24” Flyted chain conveyor, below 3 cyclones • Live floor incline feed, 26’ Long x 6’ Wide; (4) 14” flighted chains; c/w drive • 40’ x 16” Incline Belt Conveyor, chevron belt • 130’ x 24” Belt Conveyor from Baghouse • 60’ x 24” Incline belt from baghouse • 20’ Flyted chipper outfeed • Flyted 8” x 60’ Incline belt from screen • 15’ x 18” flighted incline conveyor • 120’ flighted chain to chip bin • 130’ Blower pipe & catwalk from Baghouse to bins • Tarping Station • MDI Metal Detector • Water Tank, 2000 Gal.

VKB BRUKS 812CS DRUM CHIPPER

4 STRAND LIVE FLOOR INCLINE FEEDER

CHIPPER INFEED & MDI
METAL DETECTOR

PRECISION 5' X 5' CHIP SCREEN

IME 65 UNIT SHAVINGS-CHIP BIN

IME 40 UNIT CHIP-SHAVINGS BIN

(2) KRAEMER BAGHOUSES

140' CONVEYOR-BLOWER
PIPE FROM BAGHOUSES

INCLINE CONVEYOR
FROM BAGHOUSES

3 CYCLONES

INCLINE FEED CONVEYOR

INCLINE BELT CONVEYOR

48'' BLOWER

SHAVINGS BLOWER

SMALL BLOWER & CYCLONE

TARPING STATION 2

GENERAL

(2) Fromm P323 Portable Auto Strappers • Strapack Auto Strapper, SS-80/100; 34” x 24” capacity • Pallet jacks • Fuel tanks • Carts • (6) EZY Dump Bins • Over 60 Lumber Carts, 3’ – 18’ Long • Wrap
dispensers • (20+) Stick Racks • Woodworking Shop: Rockwell 10” Unisaw, w/ Univer 508 feed rolls • Dewalt 14” Radial Arm Saw • Five Spindle Vertical Drill, 8’ Length; Air operated lift frame & clamps • Adjustable Upright Assembly Press, 4’ x 7’; air operated.
Shop: Okuma 20" x 6' Bed Engine Lathe, rests, chucks;McDougal 16" x 48" engine lathe; First Vertical Milling Machine; Horizontal Metal band saw, MHB1016; 80 Ton Hydraulic press; Arbor press; Rexon drill press; (2) Miller Gold Star 400SS Welders; Lincoln SA-200 200 amp diesel welder; Ocy-acet. Rigs; 1,000LB Jib chain hoist; Shur-lift Axle Jack; Baldor bench grinder; Tooling, drill bits, etc.

ACME STRAPPER

FROMM P323 AUTO STRAPPERS

5 SPINDLE VERTICAL DRILL

ACME AUTO STRAPPER

STRAPACK SEMI-AUTO STRAPPER

2000 GAL WATER TANK

ECK SBK-010 MILLWRIGHT OVEN

PEERLESS BINKS PRESSURE VESSEL

LION 2500 STRESS TEST BENCH

MILLER 400SS GOLDSTAR WELDER

1 OF MANY HPU'S

DELTA 10'' UNISAW & UNIVER
FEED ROLLS (2)

LAYUP TABLE, AIR OP.

LAYUP TABLE

BLACK GLUE PRESS

AUTO AND MANUAL STRAPPERS

STRAPPING CART

'10 Magnum Gold Hot
Water Pressure Washer

DEWALT MITER SAW

40' CATWALK & STAIRS

FORKLIFT TILT DUMP BIN

EZY-DUMP BINS

2 OF 18 DUMP BINS

DUMP BINS

HD 4 WHEEL CARTS

DUMP SCREEN

SPARES INVENTORY

BEARINGS

TERMS OF SALE

Payment: Full payment day of sale by wire transfer, cash, Visa, Mastercard or company cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. Full payment by cleared funds must be made before removal of items purchased. Buyer’s Premiums: 12% on-site, 15% on-line, to be added to all invoices. All items in auction are subject to additions, deletions and prior sale. Removal: Minor items day of sale. Major equipment not later than Tuesday, Sept. 28th, 2010. Additional time may be available for removal of chip bins, and related equipment by prior arrangement with the owner. All items are sold “as is – where is”, with all faults. While quantities and descriptions are believed to be accurate, the auctioneer, owner, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period.