8’ Rotary Double Trim Saw, (2) 7.5HP arbor drives;
Producto Model 81-PHPC-H Core Processor,50HP arbor, 30HP planer drive, 10HP hydraulic power unit;
Producto 81 Circular Resaw, 30HP arbor motor, 7.5HP hydraulic power unit;
6” x 13’ infeed belt;
‘9 2 Strand Bar Type Unscrambler, air activated, 1HP chain drive;
8’ Trimmer/Stacker System, (2) 7.5HP saw arbors; 8 Arm shuttle through trimmer to stacker
Package size: 8’L x 45” x 45”
Outfeed rollcase 45” x 10’L, 15 rolls, 1.5HP; w/ drop rolls for forklift access
(New cost $350,000)

ROTARY DOUBLE TRIM SAW

PRODUCTO CIRCULAR DOUBLE RESAW

9' BAR TYPE UNSCRAMBLER

PRODUCTO CIRCULAR RESAW, 30HP

RESAW INFEED LINE

8' TRIMMER STACKER LINE

TRIMMER STACKER LINE

TRIMMER STACKER LINE FROM BELOW

CLOSE-UP OF TRIM SAWS

STACKER LINE OUTFEED

WASTE BELT CONVEYORS

NEW 2006 AUTOMATIC BREAKDOWN LINE

Fully Automatic PLC controlled; Fully operational with only 3 workers
5 run x 11’ x 41” infeed chain transfer with hoist;
Auto tier by tier feed to
5 run 22’ x 44” infeed/lug chain through-feed to
Wacon Double Pointing Saw;
waterfall to 5 chain batch accumulator for 5 stake batches through
Povlsen 36” Twin Horizontal Resaws, (6” x 19’ blades); 40HP 460V arbor drives; 18” thoughfeed belt; double tire infeed holddown & 10 roll holddowns;
Univeyor 16” x 10’ rollcase to
4 run stake stacker to infeed to
Strapack RQ8Y Auto Side Seal Strapper;
Air/electric operation;
Operator consoles, PLC & Varidrive
(New cost $400,000)

'06 CUSTOM STAKE LINE

STAKE LINE INFEED HOIST

STAKE LINE FEED SYSTEM

WACON DOUBLE POINTER SAW

POINTER SAW TRANSFER

4 RUN RESAW BATCH ACCUMULATOR

POVLSEN 36" TWIN BAND RESAWS

TWIN BAND RESAW SYSTEM

RESAW OUTFEED SYSTEM

AUTO STRAPPER FEED SYSTEM

'06 STRAPACK RQ8Y AUTO SIDE SEAL STRAPPER

AUTO STAKE LINE PLC & VARIDRIVE

MAJOR EQUIPMENT

’00 Producto stake machine, (2) angle grinding heads w/ 7.5HP arbor motors; 6,000 stakes/hr
Wadkin 8”FD 6 head moulder, 8” x 4” capacity, jointed, 1 13/16” spindles; Spiromax moulder heads; Moulder heads: 4” & 8”, 4 & 6 knife heads • Moulder jointers
CVG -600 Silt Fence Machine, (5) Paslode staple guns (1” staples); Pallet of silt fencing
‘04 Cantek P20HV Thickness Planer, 20” x 9”; 5HP 220V 3ph

WADKIN 8FD 6 HEAD MOULDER, 8" X 4"

PRODUCTO CIRCULAR
DOUBLE RESAW

LOT 239 - COMPLETE KODIAK RESAW LINE (Off-site. Equipment located in Grindrod, north of Armstrong, BC)

Kodiak 36” Hor. Band Resaw, PV120; 40” x 20’; complete line as one lot including infeed transfer, Kodiak Band Resaw, Outfeed rolls, 2 run landing deck, flighted chain waste conveyor, 15' incline belt waste conveyor, 5HP hydraulic power unit
50' x 60' Steel Resaw building

50' x 60' STEEL RESAW BUILDING

SAWS

IDACO 26’ Economatic 4 Head Angle Cut Truss Saw, s/n E3070; w/ 40’ x 12” waste belt conveyor
Brewco 3 Head 28” Horizontal Band Resaw, (3) 20HP saw drives, 6” belt throughfeed; (5) holddown rolls; 1 ¼” bandsaw blades
California Cleat Multi-Rip Saw
Precision 18RHM Jump-up Chop Saw, 7.5HP w/ outfeed bar w/ stops; 8” x 10’ rollcase infeed

BREWCO 3 HEAD HORIZONTAL BAND SAW	IDACO 26' ECONOMATIC 4 HEAD ANGLE CUT TRUSS SAW
CALIFORNIA CLEAT MULTI-RIP SAW	PRECISION 18RHM CHOP SAW

CHIPPING & DUST COLLECTION

Reinbold RHZR-800 Wood Grinder, 15HP; w/ hopper
Peerless 20 unit chip bin, c/w 15HP hydraulic power unit; w/ 8’ cyclone
2 nd Dismantled 22 unit chip bin, c/w 15HP hydraulic power unit
Anderson Size 55 50HP blower, 208/230/460V
Anderson 42” 30HP blower, 230/460V
Cyclones, 6’ & 8’
24” Blower Piping

REINBOLD RHZR-800 WOOD GRINDER

PEERLESS 20 UNIT CHIP BIN

COMPLETE DISMANTLED 22YD CHIP BIN

ANDERSON 50HP BLOWER

ANDERSON 42" 30HP BLOWER

6' CYCLONE ON ROOF

8FT CYCLONE ON CHIP BIN

BLOWER PIPE

GENERAL

L&M 7’ chain package saw, Honda 18HP gas engine, on rollers
Samuel StraPack RQ8Y Auto Side Seal Strapper
(6) Self dumping bins: (2) EZ-Dump 6’ x 6’; 6’ x 6’ x 4’H; (2) 6’ x 6’ x 5’H;
Wrap Station w/ rolls of wrap
3 Roll 4’ x 8’ Lumber Rack
Stick & lumber carts & racks

'00 PRODUCTO STAKE MACHINE

CVG-600 SILT FENCE MACHINE

L & M 7' PACKAGE SAW

EZ-DUMP BIN

(2) FOOT PEDALS

LUMBER RACK

NEW ROLLER CHAIN, ETC.

PART VIEW OF SUPPLIES

ASSORTED SAW BLADES

RACKING & SHELF UNITS

LUMBER STANDS

SHOP & TOOLS

Miller Bluestar 2E 200 amp CCDC Arc Welder, Tecumseh 5HP gas engine
Hand Strappers: Fromm P320 cordless, w/ charger & spare battery; plastic strapping; Fromm P355 pneumatic, plastic strapping; Fromm 337, steel strapping; Hand strappers & crimpers
Dynasaw Handi-Bex Chain sharpener
OHAUS Harvard balance scale
Baldor double grinder/buffer; 1/2hp 1ph
Milwaukee friction cut-off saw
Westward 16sp drill press, 3/4hp120V
Rex-cut horizontal metal cutting band saw
Chains, shackles, tools, etc.
Nail guns & staplers

MILLER BLUESTAR 2E WELDER

STRAPACK RQ8Y AUTO SIDE SEAL STRAPPER

FROMM AIR & BATTERY STRAPPERS

DINASAW CHAIN SHARPENER

AIR NAILER

STRAPPING TOOLS

WESTWARD DRILL PRESS

MILWAUKEE CUT-OFF SAW

BALDOR GRINDER

TOOL CHEST & CONTENTS

OXY-ACETYLENE RIG

ASSORTED POWER & AIR TOOLS

SHOP TOOLS

GREASE GUNS, CHAINS, ETC.

BAND SAW BLADES

BOTTLE CART

TRANSFERS & BELT CONVEYORS

Newman Whitney KF-100 Infeed System: 10' x 24", Hydraulic Positioning Movable Fence, s/n 15092; Electrics, Hydraulics & 3 Solenoid 1.5hp Hydraulic Power Unit
4’ x 10’ Block Bin Tilt Hoist, 7.5HP chain drive, 230/460V
2,000lb Platform Scissor Lift , 4’ X 4’
2 Run Chain Transfer, 5’ X 13’L, 3HP Radicon 40:1 reducer
3 Run Chain Transfer, 7’ x 20’L; w/ drive
3 Run Chain Transfer, 7’ x 12’L infeed to IDACO truss saw
Waste “Y” Belt Conveyor, 12” x 12’

Newman Whitney
Infeed System

4' X 10' BIN TILT HOIST

WIDE BELT CONVEYOR, 60 IN X 7'L

2,000LB SCISSOR LIFT, 4' X 4'

2 RUN TRANSFER, 5' X 13'

3 RUN TRANSFER, 7' X 20'

3 RUN TRANSFER, 7' X 12'

COMPRESSORS

‘03 Ingersoll-Rand 10 HP Compressor
‘03 Ingersoll-Rand 7.5 HP Compressor
Ingersoll-Rand 100 gal. air tank

'03 INGERSOLL-RAND 10HP COMPRESSOR

'03 INGERSOLL-RAND 7.5HP COMPRESSOR

INGERSOLL-RAND AIR TANK

ELECTRICAL

Westinghouse (7)/Square D (2) 9 section MCC, 35 switches
Westinghouse 6 section MCC, 25 switches
Rex 112.5KVA transformer, 600/480V
Leeson Mouldo 7.5HP Variable Speed Drive
Siemens 100 & 30 Amp Switchgear
Teck cable

WESTINGHOUSE 6 SECTION
MCC

WESTINGHOUSE SQUARE D
9 BANK MCC

LEESON VARIDRIVE

REX 112.5KVA 600-480V
TRANSFORMER

(8) FORKLIFTS

Nissan 90 9,000LB Forklift, Model BGF03A40V; S/N BGF03-001112; 2 stage mast, 145” lift; side shift; LPG; Dual cushion tires
’01 Nissan 25 5,000lb Forklift, 3 stage mast 187” lift; 6747 hrs; side shift; LPG cushion tire
Clark 8,000LB dual pneumatic drive tire, propane engine, 2 speed power shift trans, 150" lift height, 60" width lift carriage, SER# Y685-0029-6881
Clark 4,000LB cushion tire, propane engine, powershift trans, 130" lift carriage, 5861 hrs, SER# GX230-0275-7960
Hyster 3,000LB pneumatic tire, propane engine, montrol shift trans, SER# B1D7963N
1995 Hyster S80LBCS 8,000LB Forklift; s/n D004V091485; triple mast, side shift; LPG
1999 Hyster S50XM 5,000LB Forklift; s/n D187V16562W; triple mast; side shift; LPG
Allis Chalmers ACC-50 5,000lb Forklift; 2 stage mast, 118” lift; LPG; cushion tires

NISSAN 90 9,000LB FORKLIFT

NISSAN 25 5,000LB FORKLIFT

Clark 8,000lb FORKLIFT

CLARK 4,000LB FORKLIFT

HYSTER 3,000LB FORKLIFT

'99 HYSTER 5,000LB FORKLIFT

ALLIS CHALMERS
5,000LB FORKLIFT

FORKLIFT BLADE

CNC HOT WIRE OPEN CELL FOAM CUTTING TABLE

2005 Command Industries CNC Hot Wire Open Cell Foam Cutting Table: Designed for cutting both black and white foam, with Enpointe full filter/venting/scrubbing system for toxic black foam emissions.Min/Max Wire Length: 48” to 117” • Unit is comprised of CPU, X-Axis Motion, Y’ Axis Motion, Hot wire system and Air Filtration System. New Cost $34,246

FOAM CUTTING TABLE

OFFICE EQUIPMENT

Office furnishings: HP Office LaserJet 3330 print station • Desks, work stations, executive chairs, bookcases • (2) New vending machines • More…
(2) QUAD POWER Refreshment Center Pop/Snacks/Chips/Soup Vending Units, each comprising (4) sections for the following:

Cold Soft Drink Unit, capacity 5 varieties by approx.40 cans;
Snack Unit, 3 chips by 6-8 varieties;
(6) Chocolates: 12 - 16 varieties;
Pringles Chips: (5) varieties x 10 cans each;
Hot Soup Unit: (4) varieties x 12 cans each

Original Cost $9,500 for each unit. One new in box, other in new condition.

WORK STATION

OFFICE CABINET

HP 3330 LASERJET MULTI-FUNCTION

STAFF LOCKER SYSTEM

1 OF 2 VENDING MACHINES

ASSORTED FURNISHINGS

TERMS OF SALE

PAYMENT: Full payment – day of sale by Wire Transfer, Cash, Visa, Mastercard or Company Cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. No Personal cheques. Majors - 25% deposit, balance day of sale. On-line bidders, 25% deposit by credit card on award of bid, with balance by wire transfer to be received within two business days. Full payment must be made before removal of purchase. 10% Buyer’s Premium at this sale. 2% surcharge for credit card purchases. All items in auction subject to additions & deletions. REMOVAL:Tools and small items within 24 hours of sale. Major equipment to be removed not later than Friday, July 18 th, 2008. Chip bin not later than Friday, July 25 th, 2008. Everything is sold “as is, where is.” All sales final. While quantities and descriptions are believed to be accurate, the auctioneers, owners, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period. NOTICE TO U.S. BUYERS: 1. Most equipment manufactured in the United States returns duty free. 2. Canadian sales tax is not applicable on goods shipped out of the country. 3. Purchases are payable in Canadian funds.