NEW TO AUCTION!

NEW 2005 BARR-MULLIN SCANNING / SAW SYSTEM

Weinig Hydromat H22BL 7 Spindle Moulder, 4" X 10" Jointed, Re-chromed in 2003; Hydraulic feed; S/N 220-1241; w/ PLC, Controls • 1986 Weinig Hydromat H22BL 6 Spindle Moulder, 4" X 9" Jointed, Re-chromed in 2004; Hydraulic feed; S/N 220-850; W/ PLC, Controls, Arrow Brake • Wadkin 6” x 3” 5 Head Moulder.

'98 Producto Dog Ear Machine, Model DE8ET-12; S/N 404-1298; 8 X 12 Cap. • Producto 81-38 Circular Resaw w/ infeed & ink rolls; s/n 358-0342; w/ Cutler Hammer 200 amp disconnect & Ampco controls • Producto 81 Circular Resaw; s/n 321-0589; c/w control • Producto 81 Circular Resaw • West Plains HG100N-098 Notcher, w/ single feed unscrambler • 1994 Merreen Johnson 424-TC Rip Saw; Cost $50K • Canwest Multi-rip Cleat saw, 10" shaft, 10" blades, max input – 2” x 10” • 6 Head Trim Saw, 6'w X 8 Strand Infeed • Grecon Dimpter 4-TH Optimizing Saw, w/ (3) cameras & software • 2 Saw Trim Table, 20’ x 5’ 4 run lugged transfer • Yates 60” Band Mill, 50HP 440V • Baxter-Whitney 24-A 30” Multirip Saw, s/n 1598 • 16'w x 7'L 2 Saw Trim Table, (2) 5HP arbor drives; 7 strand transfer, 5HP motor.

'95 Precision 18M Chop Saw; S/N 18-443; 7,5HP 460V •(3) '94 Precision 18M Chop Saws; S/N 399, 414, 486; 7.5HP • '98 Precision 18M LH Chop Saw, 7,5HP 460V • ‘97 Precision 18M-LH Chop Saw, S/N 569; 7.5HP •(2) ‘96 Precision 18M LH Chop Saw, S/N 18-485 & 487; 7.5HP • ‘86 Precision 14" Chop Saw; S/N 547.

1991 Weinig R932 10” Grinder, S/N 932-337 • 1985 Weinig R931E 9” Grinder, S/N 0931/106 • Setup stand, Grinders, etc. • Side Head Grinder • COE 10’ Flat Knife Grinder, w/ magnetic bed • Moulder Heads: (10) 9" x 6” 6 Knife Heads; Hydro grip; core back steel • (4) 10" x 6” 6 Knife Heads; Hydro grip; flat steel • (8) 6" x 6” 6 Knife Heads; Hydro grip; core back steel • (8) 4” x 6” 6 Knife Heads; Hydro grip; core back steel • (8) 2 3/8” x 6" 6 Knife Heads; Hydro grip; core back steel • (2) 2 3/4” x 6” 6 Knife Heads; Hydro grip; core back steel • (3) 2 3/8” x 4 3/4” 4 Knife Heads; clamp style; core back steel • A-Frame Moulder Head Rack • Spacers • DP grinder • Belts • Misc. knives • Spare Blades: (10) Cleat Saw; (10) Carbide Trim Saw; (16) Dog Ear Machine; (6) B-Line Trim Blades; (30) 9” x 32 tooth moulder blades; (3) 16” x 80 tooth trim saw blades; (37) 17” & 19” Producto rip saw blades.

2003 Hyster H155XL-2 15,500 LB Forklift; 3,435 HRS; S/N F006V02455A; Diesel; 212.6” Lift; Enclosed cab • 2005 Hyster H120XM 12,000LB Forklift, 782 HRS; 159.4" Lift; S/N L005V03427B; LPG • 2003 Hyster H60XM 6,000LB Forklift; 3180 HRS; S/N H177B46298A; 181” Lift; LPG • 2003 Hyster H60XM 6,000LB Forklift; 4,500 HRS; S/N H177B46333A; 181” Lift; LPG • 2003 Hyster H60XM 6,000LB Forklift; 3468 HRS; S/N H177B46296A; 181” Lift; LPG • Hyster H150F 15,000LB Forklift, s/n 01634U; 197” lift; side shift; LPG; New front tires • Hyster H150F 15,000LB Forklift, s/n 01635U; 197” lift; side shift; LPG; New front tires • Hyster H250H 25,000LB Forklift, 182” lift; LPG; Enclosed Cab; s/n CTP3330A • 1989 Nissan 9,000 LB Forklift, Model RGH02A40V; S/N 001027; 146” Lift; 3 stage mast; LPG • Nissan 9,000LB Forklift, Model V6F03A40V;145” Lift; side shift; LPG • Nissan 7,000LB Forklift, s/n BF03-001104; side shift; LPG • 1988 Nissan 6,000LB Forklift, Model RGH02A30V; S/N 001014; 146” Lift; 3 stage mast; LPG • 1992 Marklift J25EP Platform Lift; 42” x 96” platform; S/N 49020122/92 • 1995 Nissan 9,000LB Forklift, Model WGF03H40V; S/N 920051; plumbed for side shift; dual front wheels; auto; new tires; 12' mast; 6 cyl. diesel.

Moulder “A” Transfers: Package Infeed Transfer, 14' w x 22' L, four runs forward/reverse, 5HP • 4 Arm Tilt Hoist, 14' w x 6' L, 10HP • Spill Deck, 14' w x 7' L, five runs, 4HP • Stick/drop Deck Conveyor, 18' w x 31' L, 5HP • Infeed Transfer, 14' w x 9.5' L, six runs, w/ drive • Infeed Rollcase, 14' L x (6) 3' L x 9" diameter powered rolls, 3HP • Infeed rolls w/ (2) spiral rolls • 2 Roll Top/bottom pressure feed rolls • 2 Roll Bridge, 45”L, w/ two powered bottom rolls, 1’W x 8” diam., 1.5HP;• Outfeed Conveyor, 1' w x 54' L, 4HP; Leeson Speedmaster Control • Waste conveyors: 1' w x 32' L, 3HP; 16" w x 66' L, 5HP; 23" w x 37' L, incline • Block re-sort belt, 57" w x 9' L, 1HP • Green Chain, 12' w x 20' L, four chain runs, 5HP • 5 Strand Jump Belt Conveyor • 8” x 25’ Belt Conveyor, 1.5HP • Stick Stacker System & controls • Outfeed Transfer Deck, 4 Strand 14’w x 11’L • Lumber Roll Outs, (2) 4.5' w x 20' L, 10 rolls/case; (6) 20' long, 6-7 rolls per case • Grading Belt Conveyor, 24’ x 63”; .739HP 100:1.

Moulder “B” Transfers: Unit Transfer: (2) Transfers; 3' w x 15' L & 5' w x 9' L, 2HP; 2 runs • Breakdown Chain, 6.5' w x 8' L, four runs flat chain, 3HP • 2 Saw Trim Table, 8’w x 12’L transfer; (2) 7.5HP 3,500 RPM 575V arbor motors • Trim table, 8' w x 11' L, three (full length) 1(half length) lug chains, 3HP • Flat Chain Infeed, 8' w x 6.5' L • Grading Conveyor, 53" w x 24' L; .739HP 100:1• 3 Level Sorting Transfer, 2 strands flat chain; 4’w x 10’L; .75HP.

NEW TO AUCTION!

NEW 2005 BARR-MULLIN SCANNING / SAW SYSTEM

NEW 2005 Barr-Mullin Scanning/Saw System; Installed as part of complete plant configuration at a cost of over $1,300,000 USD. Fully installed, tested and fine tuned by Barr-Mullin Inc. but never used in production capacity.

Includes: Barr-Mullin Scanner; (2) Barr-Mullin "Brute" saws; Bi-directional transfer between scanner & saws; Controls, Scanning software, Fiber optics, etc.

Specifications: 450 lineal ft/minute through scanner; Inbound lumber size: Set for 2 x 4, 2 x 6, (net size 1 ½" thickness); 6ft to 20' length; Capable of: 1 x 3 through 2 x 8.

Scan Detection for: Splits, stain, rot, white speck, shake, bark pockets, scantness, knots, unsound/loose knots, knot holes, wane.

Scan Detection for: Set up for Spruce, Pine, and Fir; however, System can be modified and/or re-programmed to process other hardwood species.

REPLACEMENT COST FOR THIS SYSTEM IS IN THE RANGE OF US$840,000!

Terms of Sale:

• System will be offered as a single package at 8:45AM on AUCTION DAY.
• High bid on the Barr-Mullin system will be subject to owner approval, which will be confirmed by 10am on auction day.
• Complete infeed and outfeed systems to the Scanner/Cutters will be sold at approximately 12 o'clock noon as part of the unreserved auction, separate from the Scanner/Cutters.
• Bid price on Barr-Mullin scanner system includes dismantling and loading to FOB Langley BC at no charge to buyer.
• Barr-Mullin will provide a one year warranty from date of completion of installation and testing at buyer's facility.
• Costs of installation to be contracted directly between Buyer and Barr-Mullin, and can be discussed prior to bidding.
• Buyer's Premium of 12% will be added to the high bid price.
• Bidders must provide a Bank Draft or Wire Transfer in the amount of USD$25,000 in order to participate in the bidding process on the Barr-Mullin Scan System.
• Additional Terms of Sale will be available at auction preview.

Preview and Demonstration:

• Preview Day is Wednesday, February 8th from 9 AM to 4PM.
• Barr-Mullin Inc. representatives will be on site on Preview Day for a Meet and Greet Session to discuss the system with prospective buyers.
• Barr-Mullin technicians will live demonstrate the system to all prospective buyers from 2 PM to 4 PM on Preview Day.
• There will be a follow-up Questions and Answers period for prospective purchasers after the demonstration.

FOR COMPLETE INFORMATION CONTACT KEN ARDIEL AT kardiel@tradewestsales.com or cell: 604-551-9401.

To be sold as part of the Unreserved Auction of LeggetWood assets.

All installed in 2005!

Package breakdown, 2 separate transfers, (1) 14' w x 18' L, five runs 45" apart; (1) 16' w x 18' L, 5 runs 36" apart • Unscrambler, 5 Run Bar Type, w/ motor & reducer • Spill Deck, 9 Run 20’L x 16’w, w/ drive; w/ (8) 60” even ending rolls • Tipple Belts, (5) 6” Runs 14’w x 8’L & infeed rolls • (2) Outfeed Belt conveyors. 12” x 125’ w/ gear drives • Notcher Accumulation Belt, 4' w x 27' L, 2HP • Overflow Belt for Unscrambler, 51" w x 7' L, incline (18" to 50") knurled belt • Block Conveyors #1, #2 & #3: (3) 22" w x 32' L, each w/ 5HP • Breakdown Chain for Unscrambler • Waste Conveyor, 18" w x 16' L • Waste Conveyor, 12" w x 15' L, 3HP • Waste Conveyor, 18” w x 75' L, 3HP • Cross Transfer Belt, 7" w x 25' L, on wheels, var. jack height, 1.5HP • Double Decker Conveyor Belt, top - 1' w x 13' L, bottom - 1' w x 12' L, 1HP • (2) Grading Belt Conveyors, 48”w x 18’L, w/ drives • 48” w x 6’H Unscrambler, w/ drive • Incline Belt Conveyor, 7’L x 48’w, w/ drive • Grading Belt Conveyor, 16’ x 48” w/ drive • Belt Conveyor, 66’ x 18”, w/ drive • (2) Overhead block conveyor runs, 21’L x 24”w; no drives or belts • (2) Overhead block conveyor runs, 25’L x 24”w; no drives or belts • 5 Run Green Chain, 14’w x 33’L; • Grading Belt Conveyor, 48” x 25’L, w/ ink roll • Belt Conveyor, 18” w x 18’L; • Grading Belt Conveyor, 36” w x 44’L; • Incline Waste Belt Conveyor, 24” w x 40’L; • Overhead Waste Conveyor, 18” w x 33’L; • Overhead Waste Conveyor, 18” w x 130’L; • Overhead Waste Conveyor, 18” w x 65’L; • Steel floor for entire Scanner mezzanine.

Chop Line Conveyors: Main Block Conveyor, 23" wide, two sections 31' long & 36' long, 5HP • (3) Block Conveyors: 17" w x 17' L, 2HP; 18" w x 18' L, 1.5HP; 23' w x 20' L, 2HP • Block Sorting Turntable, 8’ diameter • Infeed Transfers: 16' w x 18' L, six runs; 15' w x 32' L, five runs, 5HP; 13.5' w x 12' L, six runs, 2HP • Chop Line Outfeed Belt Conveyors: 4' w x 54' L; w/ drive; 42" w x 44' L, 3HP; 45" w x 32' L, 2HP • Unit Transfer Decks: 14' w x 14' L, four strands (forward/reverse), 5HP; 7 runs, 12’ w x 10’L, w/ drive; 3' w x 70' L, double chain run • Unit transfer chains, 3' w x 48' L, 2 runs • Waste Conveyors: 22" w x 17' L, 1/4HP; 16" w x 80' L; 17" w x 23' L • Waste Conveyor – incline, 18" x 55' L, knurled belt• Grading Conveyors: 44" w x 16' L, 1HP; 4'w x 25' L, 1.5HP; w/ Penta Multi-drive Control ; 4’ x 15’; 1.5HP • Producto Belt Conveyor, 4’w x 9’L • Resaw Conveyors: (3)Resaw Infeed: 10' L x 6" W conveyor; 12' L x 6" belt; 14.5' L x 6" W conveyor • Resaw Grading Conveyor, 3.5' w x 15' L, adj. wheeled legs • Fence Resaw Accum. Belt, 4' w x 17' L x 43" h, 2HP • Fence Resaw Unscrambler • Pallet Resaw Accum. Belt, 4' w x 17' L, 1.5HP • Pallet Resaw Unscrambler, 5' w x 6' h, four lug chains, max length - 52" • (2)Resaw Grading Conveyors: 4' w x 8' L; 4' w x 8' L • Cleat Saw Transfers: Saw Infeed, 2HP • Outfeed Conveyor, 18" w x 15' L, 1.5HP.

Resaw Conveyors:
Resaw Infeed, 10' L x 6" W conveyor . Resaw Infeed, 12' L x 6" belt . Resaw Infeed, 14.5' L x 6" W conveyor . Resaw Grading Conveyor, 3.5' w x 15' L, variable height legs w/ wheels . Fence Resaw Accumulation Belt, 4' w x 17' L x 43" h, 2hp motor . Fence Resaw Unscrambler . Pallet Resaw Accumulation Belt, 4' w x 17' L, 1.5HP motor . Pallet Resaw Unscrambler (from Line 2), 5' w x 6' h, four lug chains, max length - 52" . Resaw Grading Conveyor, 4' w x 8' L . Resaw Grading Conveyor, 4' w x 8' L . Cleat Saw Transfers: Infeed to Cleat Saw, 2hp motor . Outfeed Grading/waste Conveyor, 18" w x 15' L, 1.5HP motor.

Uninstalled Conveyors & Transfers: Gravity Infeed Rolls, 2 roll cases - 1' x 15' L • Scissor Lift, 4' w x 8' l, min height - 14", max height - 3', 4000LB • Infeed Flat Chain, 10.5' w x 6' L, 3 runs • Infeed Rolls, footprint - 32" w x 6' L, two top/bottom pressure rolls • Stain Booth Transfer, 2 Runs 35" w x 40’ L • Outfeed Rolls, 1' w x 3' L, 4 hourglass rubber rolls • Landing Transfer, 6' w x 5' L, three runs, 1.5HP • Long Transfer, 6' w x 38' L, three runs, 5HP • 5’ x 6’w camelback transfer, 2HP • Reject Belt, 12’L x 18”w,• (2) 15’ x 12” rollcase • Reject Sort Table • 2 Strand Infeed Transfer, 3’ x 8’, 1HP • 16’ x 10’ 6 Run Unscrambler, w/ 8’ x 16’ 5 roll conveyor & 4 arm stacker system • Assorted catwalk, etc.

2001 Gross Wood Grinder, Model GAZ-102; S/N H2253/102; 90HP 50MM Rotor; New Cost $77,000; 3 x 600V; w/ Gross Control • Reclaim conveyor, 6' w x 24' L, five lug chain runs; w/ dump hopper & drive • Incline conveyor to hog, 30" w x 80' L, knurled belt, 10HP motor • Return Conveyor, 12” x 30’ knurled belt, w/ drive • Jacobson 2424 Hammer Hog, 100HP 440V • Morbark 6' X 6' Chip Screen • Tetronix Sensity Metal Detector; Control & Fiberglas Transfer section 30" w x 36' L • Metal Building housing Gross Wood Grinder; 20’ x 20’ x 40’H (Excluding siding & roof metal) • 25 Unit Hydraulic Chip Bin, c/w Top Mounted Knife unit • 30 Unit Hydraulic Sawdust Bin • 10HP Hydraulic Support Unit • 15' Diameter Cyclone, free standing • Bin Cyclones • Allied 150HP Blower; 28" X 84"; 575V • AirTek 150HP Blower, 72" X 24"; 575V • AirTek 30HP Blower; 36” X 14" • Allied 40HP Relay Blower 36" X 12" • Anderson Size 75 Blower • '01 Clarkes Pyroguard CXL4 Spark Detection System; 4 Zone Control; 3 Zones w/ sensors • Portable Bag-type dust collector • Blower Pipe throughout mill buildings • Sumner 6 Knife Chipper • Brunette 8 Knife Chipper • Brunette 5’ x 5’ Chip Screen • ( 2) 14 Unit Chip Bins (off site) • 7 Unit Sawdust Bin w/ cyclone & 40HP blower • 5’ Cyclone w/ Nelson Size 40 20HP Blower • 9’ Cyclone • Murphy HEC-36 Bag House, s/n 79073; 9’H x 4’D x 3W • Lamb Knife Hog • 60” Chip Bin.

Sullivan SE160 40HP Rotary Screw Compressor; 115 PSI; 575V • Ingersoll-Rand 25HP Compressor, Model V25H-SP; 94 CFM; SSR Control w/ tank • 15HP V-Head Compressor • Gardner Denver Pressure Tank, 165 PSI • AirTek TW-100 Air Dryer, 150 PSIG, 107 PSI • AirTek TW-55 Air Dryer, 150 PSIG, 107 PSI • TG-50 Air Dryer.

Allen Bradley 6 section MCC • Square D 5 Section MCC 600 amp Vert., 300A Horizontal • Square D 4 Section MCC; 600V 600/300 amp • (3) FPE 400 amp 600V; Switches & Splitter Box • (8) Siemens 200 amp, etc. • Siemens (11) 100 amp • 60 & 30 amp Switches • MidiMaster Vector Sensorless Control VFD • Moeller Easy 412-AC-R PLC • Furnas Auto Box • Gutters • 50 KVAR Capacitors • SOLA Mini MCR Computer Regulator • Transformers: Beaver 225 & 75 KVA • MTC 75 KVA • 150 KVA • Delta 45 KVA • Marcus 25 KVA • FPE 15 KVA, 1PH 600/120/240V • (3) 200 Amp Service Panels • Baldor Variable Speed Drive • Spare Motors: 100HP 775 RPM; 550V; (3) 25HP 575V 1160 RPM; 2.4-4.5HP Gear Drive; Baldor 7.5HP; Size 8 40:1 Reducer; (22) Ass’t small motors • Teck Cable in mill buildings.

Atco 8’ x 24’ First Aid Trailer, s/n 879-395 • 4' X 8' Platform Scissor Hoist • Hydraulic Power Units: 15hp double pump, 100 gallon tank • Kinnear 10HP Hydraulic Power Unit • 15HP HPU • Wagner Moisture Meter • Yale 5,500 LB Pallet Jack, ML-55 • (6) Samuels SS-661 Polystrappers • (2) Signode TT-3306 Table-Tyer Strappers • Strapex ES-102-A Strapper • (15) Acme Strappers (as is) • (15) Banding Carts • (20) Self Dump Bins; (15) 58" x 60" x 40"deep (two on wheels); (1) 38” x 68” x 49”; (3) 46” x 46” x 36”; (1) 65” x 80” x 48” • (28) Wheeled Stacking Carts • Single stacking corners; 48" x 48" x 8' tall • Double stacking corners; 48" x 96" x 8' tall • (3) 4 x 8 Sheets Lucite L • Pallet Lay-up Jigs & guns Section of 20’ high scaffolding • 6,000LB Steel Service Ramp • 10’ Forklift Blade Attachment • (2) Shipping Office Bar Coders • Tidy Tank & Pump • Spill Kits.

Frejoth FI-900 AEG Engine Lathe, 12” x 36” w/ QC tool holder, face plate, 3 jaw chuck, follower rest • (2) Carolina Horizontal Band Saws • RongFu RF30B Mill/Drill • (2) Makita 2414 Friction Cut-off Saws • Burn Table & Vise • Engine Hoist • Work benches • Nail Guns • Hilti TE-15 HD Drill • Hitachi G23SC2 grinder • Delta 10” Compound Miter Saw • Chicago Pneumatic air tools • Weller heat & soldering guns • (2) Stihl 084AV chain saws • Complete Electrical & Parts Room • Cratex Shipping Container • (2) Double pedestal grinders • Drills, taps, etc. • Lincoln Idealarc 250 Welder on cart • Arctic Lightning Arc 1401MV Mini Welder • Kaman key cutter set • Milwaukee ½” Hole Hawg • Ridgid threader tooling • Bench Grinders • Makita 3/8’ drill • Work benches, vises, welding masks, helmets • “C” Clamps • Fist Cable Coiler • Oxy-acetylene rigs • Hyd. shop press • A-Frame Hoist – 2 ton, w/ Lynx ½ ton electric hoist • Air hose •Creeper; Axle jacks, jack stands • Spare Belts • Lge quantity Bolt Bins & stock • Waterloo tool chest & contents • 2.5HP Shop Vac • ¾” steel table • Pipe threader attachments • (2) 8’ levels • Steel Inventory: A frame Steel Rack w/ contents of channel, round, shaft, I-Beam, etc. • Vertical Rack w/ contents of Plate, etc. • Threaded Stock • Office Equipment: Executive Office desks, credenzas, lateral filing cabinets, shelf units, etc. • Executive and client chairs • Waiting room & lunch rooms • Storage Shelving • Mita DC-3055 Copier • More... EQUIPMENT ADDED DAILY. Listing subject to additions, deletions, changes and prior sale without notice.

Executive Office desks, credenzas, lateral filing cabinets, shelf units, etc. • Executive and client chairs • Waiting room & lunch rooms • Storage Shelving • Mita DC-3055 Copier.