Driving from Kamloops, turn right onto Notch Hill Road, drive 3.9 km, then right at T onto Davies Rd. Drive .8km, then stay right (straight ahead) onto Taylor Rd. and drive 2.3 km to Notch Hill plant. From Salmon Arm, turn left on the other entrance onto Notch Hill Rd., then follow it for 6km to the same T intersection, drive straight onto Davies Rd. and follow remaining directions above.

LUMBER REMANUFACTURING

Mobile Dimension 128E Portable Sawmill, 5’ x 25’ log cap.; (2) 25HP drives; 12” cut vertical & 8” cut horizontal blades; hyd. power unit; control panel & electrics • General 90-900M2 Horizontal Band Resaw; 21.5HP; 220V; 12” through-feed belt; Digital readout • Weinig Profimat H22N 5 head planer, 4” x 9” • (2) OGAM PO-280 Multi-rip Saws; 30HP 575V • OGAM PO-220 Multi-rip saw • 2007 Pinnacle MRS-12 Multi-rip saw, 50HP 600V; s/n 0652059 • Cantek C14RS Straight Line Rip Saw; 20HP 575V; 24” throat; open side • Straight Line Rip Saw; 7.5HP 208/230/460V • Cantek LH Jump Up Chop Saw • 2007 Pinnacle YFC-18R 18” up acting chop saw • Irvington LH up acting chop saw • Coastal 3500 Digital Lumber Meter • Wagner System 100 Moisture Meter / passthrough sensor & Siemens Simatic OP3 control • CMI 24” x 28’ flat belt conveyor, w/ 3HP drive; rough belt.

MOBILE DIMENSION 128
PORTABLE SAWMILL

WEINIG H22N 5 HEAD PLANER

GENERAL 90-900M2 24''
BAND RESAW

1 0F 2 OGAM PO-280
MULTI-RIP SAWS

CANTEK C14RS RIP SAW

'07 PINNACLE MRS-12
MULTI-RIP SAW

OGAM PO-220 MULTIRIP SAW

STRAIGHT LINE RIPSAW

CANTEK LH CHOP SAW

'07 PINNACLE YFC-18R CHOP SAW

WAGNER SYSTEM 100
MOISTURE METER

CHOP SAW & INFEEDS

COASTAL 3500 MOISTURE METER

INFEED TRANSFERS

IRVINGTON LG CHOP SAW

RESAW LANDING TABLE

6 ROLL INFEED SYSTEM

WOODWORKING

Protec PT-7 Curve Press; s/n 00-PT-059; 1PH; w/ secondary layout table • SICAR Express 3200 Sliding Panel Saw; 220V • SCM Si140n Sliding Table Saw; w/ fence • ’97 SCM 16N3200 Panel Scoring Saw; s/n 108163 • Rockwell 34-450 table saw • Cantek TAS-12H table saw; 480V 3Ph • (2) General 450 Tilt Arbour Table Saws • Dewalt 3526/3 Tilt Radial Arm Saw, 36” arm; 230/460V 1Ph • Wadkin 10” table saw • Delta 10 Radial Arm Saw, 1 Ph; 120/240/480V • Olga TR2 double cut miter saw • SICAR S1000M shaper • SICAR Shaper, w/ 3 roll feeder • Cantek SS-512T Shaper, 5HP; Delta 36-835 3 roll power feed • Wadkin Bursgreen BEM Shaper w/ Europa 440 4 roll feed • Wadkin Bursgreen BER 4 Shaper; 220V 3Ph; Holz-her ETZ 3 roll power feed • Delta 43-791 5 Speed Shaper, 7.5HP • Marson CT-201 Shaper; 220V 3Ph. • SICAR Forte 630 Thickness Planer, 12” x 24” • 24” Thickness Planer; Model RFT60; 575V • SICAR F350 12” Jointer • Delta DJ-20 8” Jointer; Model 37-350; 230V 1Ph • SCM R9 L’Invincibile Overhead Router; 36” throat; Adjustable table • Sandingmaster SCSB.2.1100 44” wide belt sander, 25/15HP, 575V; New feed belt • Ramco 37 Wide Belt Sander; 36” belt; s/n 1063 • Progress 150 Edge Sander • Custom 6” Edge Sander, 2HP 208/230/460V • Ehemann 12” open sided sander • Larry’s Clamp, 24” air operated • Norfield Jointmaster Biscuit Machine, s/n JMI-2 • 1997 Geetech CT-1913 Chisel Mortiser • General 90-450 24” Vertical Wood Band Saw; 3HP 230V 1PH • General 390 vertical wood band saw; 208V 3Ph • General 340 Floor Drill, 1/2HP • Delta 17-965/C 16 Speed Floor Drill, 16 ½” • Delta Picture Frame Machine • Brevetti AU T82PRA picture frame assembler • AMP picture frame speed nailer • Dual spindle profile sander; (2) Baldor 5HP arbour drives; digital controls & VFD’s.

SCMi SANDYA 52'' SANDER

SANDINGMASTER 44'' BELT SANDER

RAMCO 36'' SANDER

PROGRESS 150 EDGE SANDER

CUSTOM EDGE SANDER

EHEMANN 12'' SANDER

SICAR EXPRESS 3200 PANEL SAW

SCM 16-3200 SLIDING PANEL SAW

SCM Si150N PANEL SAW

PROTEC PT-7 CURVE PRESS

PROTECH PT-7 CURVE PRESS
SECONDARY TABLE

SCM R-9 OVEREHEAD ROUTER

SICAR S1000M SHAPER

CANTEK SS-512T SHAPER

DELTA 43-791 SHAPER

WADKIN BURSGREEN BEM SHAPER

WADKIN BURSGREEN BER 4 SHAPER

MARSON CT-201 SHAPER

SICAR FORTE 630 24'' PLANER

24'' PLANER

SICAR F350 12'' JOINTER

DELTA DJ-20 8'' JOINTER

GENERAL 390 BAND SAW

GENERAL 90-450 BAND SAW

DEWALT 3526-3 RADIAL ARM SAW

DELTA 10 RADIAL ARM SAW

Olga TR2 double cut miter saw

NORFIELD JOINTMASTER
BISCUIT MACHINE

1 OF 2 GENERAL 450 TABLE SAWS

2 SPINDLE PROFILE SANDER

DELTA 36-835 FEED

EUROPA 440 4 ROLL FEED

'97 GEETECH CHISEL MORTISER

DELTA 17-965-C DRILL

MANUAL CLAMP PRESS

DELTA SIDEKICK TABLE SAW

1 0F 6 MAKITA MITER SAWS

VENEER & CLAMPS

Doucet 12’ Clamp Carrier, Model SRH -12-10.5-108-38 ; s/n 97-09-154 ; 9 arm ; 11 clamp ; c/w HPU • IItalpresse SCF/6 Hot Veneer Press, 51” x 98” capacity; solid platen; $5,000 upgrade • Black Bros. 3’ x 7’ Cold Door Press, side load, air bag • Raytherm Panelmaster Radio Frequency Press • WorkRite 750 Radio Frequency Unit • (3) JLT 138B 48” Edge Glue Dip Tanks • Graco President 207-352 pump • More...

DOUCET 12' CLAMP CARRIER

ITALPRESSE SCF-6 HOT
VENEER PRESS

RAYTHERM PANELMASTER
RF PRESS

WORKRITE 750 RF UNIT

1 OF 3 JLT 48'' EDGE GLUE APP. TANKS

GENERAL

Advance 4’ x 8’ electric scissor lift • 2008 Northwest Woodmaster 4400 solid fuel-fired boiler w/ ETC digital control; wood, pellets, etc.; Used for building & kiln heating • (3) Solid Fuel-fired boilers for
hot water heating, etc. • Over 600’ dry kiln hot water copper tubing, ¾”, 1” & 2” • Advance 4’ x 6’ x 4’H forklift dump bin • (4) Bottom Dump Waste Bins, 4’ x 10’ x 4’H • EZE-Dump bin, 5‘ x 6‘ x 4’H • (10+)
Sections Warehouse Racking, 30” x 8’ x 9’H • (2) Briggs & Stratton 9HP fire pumps, 2” in and out • HD industrial hydraulic hose crimper & dies • (7) A-frame Carts • Over 300 C-clamps, Bessey &
pipe clamps, etc. • FMC AVistrap ESM-1 semi-automatic strappers • Gas welder • 36” x 10” feed belt w/ (2) holddownrolls; 3HP • 25HP pump • Baldor 2HP hyd. power unit • 6 Roll top & bottom infeed
system • Single axle trailer chassis • Wheel barrows, Stick racks & carts • Work Benches & vises • ITC 5,0000LB Pallet Jacks • Swipe Card Time Clock & software • Karcher 1750G pressure washer •
Parts shelving • (2) B&D Hinge Butt Template Kits • Quick TTGA - 12 12” Table Top Glue Spreader; 1/4HP 115V • Delta Sidekick 8-1/4” builder’s table saw, 115V • Manual Clamp Press, 48” x 30”
• Stegherr KSF-R Window Mullin Halving Machine • Compressors: Ingersoll-Rand 2340N5 5HP Compressor; 175 PSIG ; 230V • I/R 5HP Compressor, 1PH; 175PSI • I/R 5HP Compressor, 80 Gal;
; 175PSI • I/R 5HP Dual Piston Compressor • (2) I/R Pro-Air II 6.5HP Compressors, 1PH; 175PSI • Gardner Denver air dryer • Power Fist 1.5HP compressor; 3.6cfm; 115psi • Tools: Mitre Saws:
(2) Makita LS1214; Makita LS1214L; (3) Makita LS1212; King Crosscut Mitre Saw Nailers & Staple Guns: Milwaukee 7150- 21 18GA pneumatic brad nailer; (2) BEX 16/64-A1 16GA Pneumatic
brad nailer; Canwood SE1830F 18GA Pneumatic nailer; Canwood KCT-0320F 18GA Pneumatic nailer; Paslode F18-200 air nailer; Porter-Cable FC350 clipped head framing nailer; Senco Air staple
gun; Hitachi N3804AB 3 air nailing gun; (2) Hitachi NT50AE air nail guns • Routers: Makita 3612; Makita 3620; Makita 3606; Makita 3601B; Porter-Cable 690R/6931 base HD router • Circular
Saws: Makita 5007NB 185mm; Ryobi 7-1/4”; B&D 5738 7-1/4” • Hand Sanders: (2) Makita 9924DB 3’’ belt sanders; Bosch 1594 portable planer; Sears 315 portable planer; Dewalt DW423 electric
orbital; Ingersoll-Rand 4151 air orbital • Drills: Makita MXT 14.4V cordless; Makita 7233D 14.4V cordless; Makita 6013B-R 13mm ½” drill; Powerdyne reversible pneumatic drill; Chicago-Pneumatic CP7300R mini drill; Dewalt DW21009 3/8” electric; Dewalt DW223G electric • Misc: (2) Power–Grip Vacuum Suction Cup Lifters; Wolf’s Head Vacuum Suction Cup Lifters; Lamello Top 10 Wood- Jointing System; (2) Bosch 1587AVS electric jigsaws; Dewalt DW682 Plate Joiner; 3M Jet-Weld II adhesive applicator; Super Stripper 1500 heat gun; Weedeater VIP Gatorvac leaf blower.

'08 NORTHWEST WOODMASTER
4400 SOLID FUEL BOILER

2 OF 3 SOLID FUEL BOILERS

1 OF 5 INGERSOLL-RAND
5HP COMPRESSORS

INGERSOLL-RAND AIR DRYER

WING AIR MAKEUP-HEATER

1 OF 4 4' X 10' BOTTOM DUMP BINS

EZ-DUMP BIN

ROLLING WRAP STATION

QUICK 12'' GLUE SPREADER

AIR & POWER TOOLS

ASSORTED POWER TOOLS

ASSORTED ROUTERS

ASSORTED TOOLS

PART VIEW OF PIPE CLAMPS

BANDING TOOLS & CART

CRL 2200-RP WET
BELT GRINDER

DOUBLE PROFILE SANDER

GLASS FEED TABLE

(2) PICTURE FRAME MACHINES

25HP HYDRAULIC PUMP

3' X 10'' FEED BELT

TRAILER CHASSIS

RACKS OF ASSORTED LOUVRED VENTS

DUST COLLECTION & BLOWERS

Blowers: Nelson 14” x 42” 50HP Size 50 • 12” x 36” 40HP
230/460V • 12“ x 42“ 30HP 230460V • 14” x 36” 25HP 230/460V
• (2) Torrit 18” cyclones • Cincinnatti 5HP blower fan •
Cyclones: 12’ diameter x 15’L; 6’ diameter x 20’L; 8’ diameter
cyclone • Misc. Size Blower pipe • Wing 27-H fresh air makeup
supply & heater (Cost $10,000) • King KC-3103C Single
Bag Dust Collector • Delta Single Bag Dust Collector; 2HP
1Ph • 24” Dust cyclone & blower fan 18” Dust cyclone • 28” x
14” Blower & 15HP 230/460V motor; w/ stand • Delta 50-870C
Air Filter; 3 speed fan, 4 hr max timer • G-12 Squirrel cage fan

6' CYCLONE

6' X 20' CYCLONE

8' CYCLONE

12' X 15' CYCLONE

NELSON 50HP BLOWER

40HP 12'' X 36'' BLOWER

30HP 12'' X 36'' BLOWER

25HP 14'' X 36'' BLOWER

15HP BLOWER

5HP BLOWER FAN

DELTA DUST COLLECTOR

BLOWER PIPE

KING DUST COLLECTOR

1 OF 2 TORRIT 18'' CYCLONES

COMPRESSORS

Ingersoll-Rand 2340N5 5HP Compressor; 175 PSIG; 230V
Ingersoll-Rand 5HP Compressor, 1PH; 175PSI
Ingersoll-Rand 5HP Compressor, 80 Gal; 175PSI
Ingersoll-Rand 5HP Dual Piston Compressor
(2) Ingersoll Rand Pro-Air II 6.5HP Compressors, 1PH; 175PSI
Ingersoll-Rand air dryer
Power Fist 1.5HP compressor; 3.6cfm; 115psi

FILING ROOM & SHOP

Weinig Rondamat 950 Profile Grinder • Weinig R911 Profile Grinder • Viel planer & shaper head grinder • Viel ¾” belt grinder • Grizzly G2790 6“ universal surface grinder, 110V • Metabo double grinder • HD Double Pedestal Grinder • Busy B B846 Floor Drill • CRL 2200- RP Wet Belt Glass Grinder • Silvey chain grinder • Lincoln MigPak 15 Welder & wire feed • Acklands 225AC Sizzler Welder; 120V • Power Fist Parts Washer • Wagner L612 Moisture Meter • Lignomat Moisture Meter & Probe • Delmhorst KM500 moisture meter • Delmhorst RC IC moisture meter • Milwaukee Friction Saw •
Oxy-acetylene set • Delta 8” bench grinder • Ohaus Scale • Moulder & Shaper Heads • Tilt & Turn Cutters, refurbished; Cost $20,000 • Rimad 10” carbide tipped dado set • Dado Blades & cutters • Cutter Knives & knife stock • Spare band saw & circular saw blades.

WEINIG RONDAMAT 950
PROFILE GRINDER

WEINIG R911 PROFILE GRINDER

GRIZZLY 6'' UNIVERSAL
SURFACE GRINDER

LINCOLN MIGPAK 15 WF WELDER

ACKLANDS 225AC SIZZLER WELDER

MILWAUKEE FRICTION CHOP SAW

TILT & TURN CUTTERS

MOULDER HEADS & BLADES

RIMAD CARBIDE DADO SET

ELECTRICS

(2) Delta DTA150 150KVA Transformers; 600-208Y/120V • Rex 75KVA transformer, 600-480V • BE 75KVA Transformer, 600-480V • Marcus 75KVA 480/240V 3Ph • (2) Marcus 45 KVA 600/240V 3Ph. • Hammond Type K 30KVA transformer; 208y/120V 3 Ph. • Rex 25 KVA transformer, 600/480V 3 Ph. • Hammond 15KVA 240/600V step up transformer • Beaver 3 KVA 600/480V 3Ph. • FPE 600, 400, 200 100,60 & 30 amp switchgear; Splitters, capacitors, etc. • Teck Cable, more...

ROLLING STOCK

John Deere 644G Wheel Loader, Grapple, blade, bucket; Low hours
Case 1845C Skid Steer Loader; Attachments: 3 way blade; (2) buckets, cleanup & digging; grapple; backhoe; 2,420 hrs; Good rubber
Cat 110 11,000LB Forklift; Model DP50 Type D; Diesel; s/n 6CM10137; 159” 3 stage mast; 8,474 hrs showing; Rebuilt Transmission
2005 Cat GC 45KS 10,000LB Forklift; 189” lift; Sideshift; 5,260 Hrs; s/n AT87A00947
2006 Cat P5000-LP 5,000LB Forklift; 188” lift; Sideshift; 4,590 Hrs; s/n AT3506341
Lift-All L50D 5,000LB All Terrain Forklift, 2WD; John Deere diesel engine; 2 stage 12’ mast; Sideshift; s/n 7527
Hyster 5,000LB Forklift; LPG
2005 Hallmark 24’ Tandem Axle Utility Van Trailer, 8’ x 20’; Rear and front doors
2003 Dodge Ram 3500 Crew Cab Pickup; Cummins diesel; dual rear wheels; long box 330,000km
1986 Ford 4,000 gal water truck; Cat diesel; Lamborgini diesel water pump; Duck spray and rear spray bar; Honda trash pump; stainless tank. 525,000 km;
1986 International 500 4 x 4 1,200 gallon hydroseeder; stainless tank; dual tires
Ford 2,000 gal water truck

JOHN DEERE 644G WHEEL LOADER

CASE 1845C SKID STEER

CAT 11,000LB FORKLIFT

'05 CAT 10,000LB FORKLIFT

'06 CAT 5,000LB FORKLIFT

LIFT-ALL L50D 5,000LB
ALL TERRAIN FORKLIFT

18' TANDEM AXLE UTILITY TRAILER

INVENTORY

Lumber & wood inventory; Wood doors & windows; Bolts, nuts, fasteners; Door hardware; Nails, staples, glue, caulking; New bearings, pillow blocks, electrical, belts, wiring, bolt stock, more...

TERMS OF SALE

Payment: Full payment day of sale by wire transfer, cash, Visa, Mastercard or company cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. Full payment by
cleared funds must be made before removal of items purchased. Buyer’s Premiums: 12% on-site and 15% on-line, will be added to all invoices. All items in auction are subject to additions, deletions and prior sale. Removal By: 3 pm, Friday, Sept. 2, 2011. No exceptions, unless arrangements are made directly with owner. All items are sold “as is – where is”, with all faults. While quantities and descriptions are believed to be accurate, the auctioneer, owner, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period.