UNRESERVED LUMBER REMAN

 

AUCTION

 

Due to Retirement of Owner of


PACIFIC RIM REMAN LTD.

 

 
Auction Date: TUESDAY, JUNE 19TH - 9AM
Preview Date: Monday, June 18, 9am – 5pm
Location:

20255 102 Ave, Langley, BC

Download auction brochure
Adobe PDF (2.05 MB)

Listing subject to additions, deletions, corrections and prior sales without notice.


Last Updated: Tuesday, June 5, 2007 - 12:10 AM Pacific Time

(3) MOULDERS

2005 LMC Leadermac Speedmac 623 6 Head High Speed Moulder, Jointed, 6"x 10" capacity, 200 fpm; 2 1/8" spindles; All oversize drives, Cost $180,000; Baldor dynamic brake • 2002 Weinig Unimat 1000 6 Head Moulder, 6" x 10"; Non-jointed; 40mm spindles; p/w 1st spindle below: 10HP; 2nd spindle right: 10HP; 3rd spindle left: 15HP; 4th spindle above: 25HP; 5th spindle above: 20HP; 6th spindle below: 30HP; chip breaker; 1055mm feed table •2000 Weinig Unimat 23E 5 Head Moulder, Model U23E; 4" x 9" cap.; 120fpm; Non-jointed; 40mm spindles; S/N 99733; 600V, Non-jointed: Min board length 18"; Rechromed in 2006, Hydraulic power unit.

Moulder Heads: Hydrolock 2 1/8" bore: (4) 2 5/16" 20 degree 6 knife; (3) 3 7/8" 20 degree 6 knife; (2) 5 7/8" 20 degree 4 knife; (4) 7 1/16" 20 degree 6 knife; (4) 9" 20 degree 6 knife; (1) 5 5/16" head for saws; (1) 6" 20 degree 4 knife; (2) 7 1/16" 20 degree 4 knife; (3) 9 7/16" 20 degree 4 knife • 40mm heads: (2) 8" 20 degree 4 knife; (2) 2 ½" 20 degree 4 knife; 10" 4 knife; 4" 20 degree 4 knife; 2" 20 degree 4 knife; 10" Spiral head.
'05 LEADERMAC 623 MOULDER
'02 WEINIG UNIMAT
1000 MOULDER
'00 WEINIG UNIMAT
23E MOULDER
(5) SAWS

Kent 32" Horizontal Band Resaw, 12" x 12" capacity; 12' x 12" feed belt; 30HP drive, 3HP feed motor; w/ Vickers hydraulic power unit; Custom hold down infeed rolls • Jenkins Double End Tenoner, 8" min to 10 ½' maximum cut; angle cuts • Heian GR-12 Multi Rip Saw, 4" x open sided; s/n 490921 • Cantek CS-18R RH Jump chop saw; 7.5HP 230V; 12' x 10" in & outfeed rolls • Nelson & Atkinson NA-800 RH Jump chop saw 12' x 16" Infeed & 16' x 12" Outfeed rolls • More...
KENT 32" HOR. BAND RESAW
HEIAN MULTIRIP SAW
NELSON & ATKINSON
CHOP SAW
JENKINS 8 - 10.5' DOUBLE
END TENONER
CANTEK JUMP CHOP SAW
2006 DUST COLLECTION SYSTEM

2006 Conquest Dust Collection System (New Cost $110,000), including: AirTek 10' Cyclone • AirTek 48" x 30" air lock • 72" x 22" 100HP Blower • Rotool RTL F Baghouse System; self-cleaning 15 bag 200 sq. ft., 64" diameter, 21,000cfm • Conquest 12" x 30' U-trough enclosed screw conveyor, 3HP 575V • Conquest 12" x 12' U trough enclosed bi-directional screw w/ conveyors • (2) Conquest Dynaload Bin Loaders w/covers, 40' bin container lids • Manco M5380 control panel & electrics • Blower Pipe throughout mill, 4" to 30".
'06 AIRTEK CONQUEST
DUST COLLECTION SYSTEM
MANCO CONTROLS
TRANSFERS & MATERIALS HANDLING

Ramtech 7 run Lateral Chain Moulder Infeed, 17'4"W X 5'2"L w/ 2 roll hold down infeed, plastic chain; Max 300 fpm • Ramtech 8 run Lateral Chain Moulder Infeed, 17'4"W X 5'2"L w/ 2 roll hold down infeed, plastic chain; Max 300 fpm • (2) Ramtech 10HP Hydraulic Power Units, 230/460V & 575V • Advance 5' X 10' 10,000LB Scissor lift • (2) Advance 4' X 8' 6,000LB Scissor lifts • Advance 3' X 6' 4,000LB Scissor lift • 48" x 30' Belt Conveyor w/ Drive • 10' Electric Turntable • (2) Mobile ML55 Pallet Jacks.
1 OF 2 RAMTECH INFEED
TRANSFER DECKS
ADVANCE 5' X 10' 10,000LB
SCISSOR LIFT
ADVANCE 4' X 8' 6,000LB
SCISSOR LIFT
3' X 6' 4,000LB SCISSOR LIFT
GRINDING ROOM

Weinig R-950 Profile Grinder, s/n 90734 • Moulder heads, Knives, (4) Setup stands, 2 1/8" & 40mm • 12" Electronic calipers, Scales, Double grinder, Grease guns, Saw blades.
WEINIG R-950
PROFILE GRINDER
PART VIEW OF
MOULDER HEADS
MOULDER HEADS
(7) FORKLIFTS

2006 Yale Veracitor 60VX 6,000LB Forklift, Model GLP060VXEUSV097; 853HRS, S/N B875B06114D; S/S LG, 142" 2 Stage mast, Side shift • 2004 Yale 5,000LB Forklift, Model GLP050TGEUAE084; S/N H875B28905B; LPG, 3 stage,189" Mast, 2,200 Hr's, Side shift • 1998 Toyota 35 8,000LB Forklift, Model 52-6FG35; S/N 10280; 145" Lift; Cushion tire, Side shift, LPG • '01 Yale 5,000LB Electric Forklift, Model ERC050; LPG; Side Shift, c/w Charger • '00 Cat 5,000LB, Model GK25K; 131" duplex mast; LPG; side shift; cushion tire • '99 Toyota 8,000LB, Model 52-6FGCU35; LPG; side shift, 218" triple mast, cushion tire • Yale 4,000LB Electric Pallet Lift, c/w Charger.
2006 YALE 6,000LB FORKLIFT
'02 YALE 5,000LB FORKLIFT
'98 TOYOTA 35 8,000LB FORKLIFT
'01 Yale 5,000lb Electric FORKLIFT
Yale 4,000LB Electric Lift
COMPRESSORS

Ingersoll Rand 20HP Compressor • Swan 10HP Compressor, 208/230/460V.
INGERSOLL RAND 20HP COMPRESSOR
SWAN 10HP COMPRESSOR
GENERAL

2002 ISEL CPM 3020 Profile Template Maker, Full Enclosure AutoTemp A0812 CNC router w/ 8" x 10"; carbide bits, s/n 2456 Paid $19,000; S/N 2456; c/w computer & scanner Over 300 acrylic profile templates • Spare acrylic template material • 2005 Signode HB-4300 Auto Strapper, 52 straps/min. • 2005 Orgapack OR-T-300 Battery Hand Strapper • Banding Carts & Tools • (5) EZY dump bins.

Compressors: Ingersoll Rand 20HP V-Head Compressor • Swan 10HP Compressor, 208/230/460V • (2) General Double Dust collectors, 2HP 220V 1Ph • (2) Makita miter saw, Models LS1030N, LS1440 355mm • (3) Dewalt 12" mitre saws, Models DW705, DW715, DW706 • Wrap stands w/ Blank wrap • Warehouse Racking, 12 sections • (3) Rolling cantilever racks • Lumber Carts, Dollies.

Air Tools: (6) Duofast air staple guns, KS-7648 & MS-7664C • (2) Chicago Pneumatic M558DB ½" air impact wrenches • Hitachi N3804AB2 1 ½" pneumatic staple gun.

Shop: Miller 200 amp Welder • Brico 5/8" floor drill press, Model RDM-80P • TWS 250 10" Table saw • 20 Ton Hydraulic Shop press • Propane bottle lockup • Tool chests, • Hand tools, Lockers, First Aid, Lunchroom.

Electrics: Switches: (4) Siemens, GE & FPE 200 amp; (3) Square D & Cutler Hammer 100 amp; GE 60 amp; (3) Siemens & Eaton 30 amp.

Office Equipment: Fax machine, Copier, desks, chairs, 10' Boardroom table, computers & office machines • Much more...
ORGAPACK POWER STRAPPER
HYD. SHOP PRESS
1 OF 5 EZY DUMP BINS
WAREHOUSE RACKING
TERMS OF SALE
PAYMENT: Full payment – day of sale by Cash, Visa, Mastercard. No Personal cheques. There will be a 12% buyer's premium at this sale for on-site bidders, and a 15% buyer's premium for online bidders.  All items in auction subject to additions & deletions. REMOVAL: All items must be removed by 3pm, Saturday, June 30, 2007 - NO EXCEPTIONS.  Purchasers are responsible for loading and removal.  Everything is sold “as is, where is.” All sales final. While quantities and descriptions are believed to be accurate, the auctioneers, owners, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period. NOTICE TO U.S. BUYERS: 1. Most equipment manufactured in the United States returns duty free. 2. Canadian sales tax is not applicable on goods shipped out of the country. 3. Purchases are payable in Canadian funds. At time of printing the US dollar is worth $1.10 Canadian.
ABSENTEE BIDS
If you are unable to attend this auction, you may register a confidential bid with Tradewest. Tradewest will exercise your bid at the auction, ensuring that you pay only the amount the item sells for, not necessarily the full amount of your bid. Absentee bids are permitted only with pre-registration and receipt by Tradewest of a 25% deposit. Call Tradewest for complete information.
Download Absentee Bid Form
Adobe PDF (50 KB)
CONTACT INFORMATION
For additional information contact our office:
Office: Tel. (604) 530-9351
E-mail: sales@tradewestsales.com

 


Back To Top