Home Mailing List Feedback Contact Us

PAST SALE

Download auction brochure
Adobe PDF (1.39 MB)

Last Updated: Thursday, August 31 - 1:55 PM Pacific Time

DIRECTIONS & ACCOMMODATIONS
ABSENTEE BIDS
If you are unable to attend this auction, you may register a confidential bid with Tradewest. Tradewest will exercise your bid at the auction, ensuring that you pay only the amount the item sells for, not necessarily the full amount of your bid. Absentee bids are permitted only with pre-registration and receipt by Tradewest of a 25% deposit. Call Tradewest for complete information.
Download Absentee Bid Form
Adobe PDF (50 KB)
DEBARKER LINE
9'W x 15'L 5 run infeed log deck; c/w 3hp drive • 1991 Barker 50" x 20' Rosser Head Debarker; Model B-50L; s/n 9110121; Complete With: 15HP head motor; 3hp compressor • 24" x 40' hourglass outfeed rollcase; Complete With: 3HP drive; 20 Rolls • 8' x 15' 3 run outfeed log deck; Complete With: 3 HP drive • 5HP Hydraulic Support Unit • 18" x 15' Waste Belt Conveyor; Complete With: 2hp drive
DEBARKER LINE
DEBARKER POSITIONING ROLLS
DEBARKER INFEED DECK
DEBARKER LOG TROUGH
 
DEBARKER OUTFEED DECK
MAIN ELECTRICAL ROOM
Siemens 2000 Amp Main Switch; 40V/ITE; Section 1 of 3 - Switch Panel:
SIEMENS 2000 AMP MAIN SWITCH
 
SWITCH PANEL & TRANSFORMER
 
SERVICE PANEL
 
Top Panel:     Compressor 100 amp
2nd Panel: D-D 80 amp File 80 amp
3rd Panel: D-E 100 amp 240V Transformer 125 amp
4th Panel: D-T 125 amp D-A 100 amp
5th Panel: Kiln 200 amp 277V Lighting 225 amp
6th Panel: D-B 250 amp D-C 250 amp
7th Panel: Kiln Fans 200 amp BLANK -
8th Panel: Edger 600 amp BLANK -
Section 2 of 3 - Model FC-I, Series 6; S.O. 19-22174-01 • Section 3 of 3 - ITE FC-I, Series 6; S.O. 19-22174-01; 480Y/277 vac; 3Ph; 3 Wire; 2000 amp; w/ meter • Siemens 50 KVA Transformer • (2) Square D 225 Amp Service Panels
HEAD RIG LINE #1
11' x 20' Infeed Log Deck; WR-82 chain; c/w 3 arm log turner; pin stops; 3HP drive; 1991 JWM (CKS) 30" 3 Bunk Carriage; Model HE-1000; Hydraulic setworks; Bunk Spacing: 4' & 7' Complete With: 10HP Hyd. Support Unit; 50' Carriage Track; 20hp Friction carriage drive; Controls, Pantograph • 1991 JWM (CKS) 52" Band Headrig, 6 ½" Wheel width; weight strain; shifting top guide; Complete With: 75HP 460V Band Motor; Laser guide • 36" x 20' Outfeed Rollcase, 11 rolls; c/w 6' 3 run jump chains; 3HP drive; 10' x 10' 3 run outfeed deck, Complete With: 3HP drive • Klochner Moeller 5 Section MCC, 480V; Hor. 600 amp, Vert. 300 amp
INFEED DECK
 
INFEED DECK
 
INFEED DECK
 
LOG CARRIAGE
 
BANDSAW
 
BANDSAW
 
OUTFEED ROLLS
 
HEAD RIG LINE #2
10' X 10' Infeed Log Deck, c/w 3 run 6' jump chain; 3HP drive • 30" x 15' rollcase, 9 rolls, c/w 3HP drive • 9' x 15' 3 run log deck, c/w 3 arm log turner; 3HP drive; pin stops • 1991 JWM (CKS) 30" 3 Bunk Carriage; Model HE-1000; Hydraulic setworks; Bunk Spacings 4' & 7'; Complete With: 10HP Hyd. Support Unit; 50' Carriage Track; 20HP friction carriage drive; Controls; Pantograph; 10HP Hydraulic Support Unit • 1991 JWM (CKS) 52" Band Headrig, 6 ½" Wheel width; weight strain; shifting top guide; Complete With: 75HP 460V Band Motor; Laser guide • GE 8000 Line 5 Section MCC; 480V • 24" x 20' Outfeed Rollcase, 11 rolls; Complete With: 5' 4 run jump deck; 3HP drive 5' x 9' 4 run transfer deck; Complete With: 3HP drive • 9' x 20' 4 run transfer deck; Complete With: 3HP drive • 24" x 90' Rollcase, 46 rolls; Complete With: 3 sets 3' 4 run jump chains; (4) Drives • 25HP Hydraulic Support Unit • 24" x 60' Rollcase, 32 rolls; Complete With: (2) Sets of 3 run jump decks; (3) 3HP drives • 10" x 80' Belt Conveyor; Complete With: 3HP drive • 9' x 27' 4 run transfer deck; Complete With: 3HP drive • 9' x 8'L 4 run transfer deck; Complete With: 3HP drive • Klockner Moeller 3 section MCC; 480V; Horizontal 600 Amp, Vertical 300 Amp • 9' x 20' 4 run transfer deck; Complete With: 3HP drive • 9' x 20' 4 run transfer deck; Complete With: 3HP drive
LOG CARRIAGE
 
BANDSAW & OUTFEED ROLLS
 
OUTFEED
 
LOG CARRIAGE
 
HEADSAW SYSTEM
 
HEADSAW
 
HEADSAW SYSTEM
 
BAND SAW
 
HEADSAW
 
FEED DECKS
 
RESAW LINE #1
1991 JWM (CKS) 42" Band Resaw, Model GCF -1100; 6 ½" Wheel Width; weight strain; Complete With: shifting line bar; top press rolls; 25HP drive; Infeed & outfeed merry-go-round system; Auto Infeed Controls; 7.5HP Hydraulic Support Unit • 16" x 20' Belt Conveyor; Complete With: 3HP drive • 20" x 30' Rollcase, 20 rolls; Complete With: (2) sets 3' 4 run jump decks; 3 drives • 12' x 15' 4 Run Infeed Deck, H-78 Camelback chain; Complete With: 3HP drive • 12' x 8'H 6 run bar type unscrambler; Complete With: 3HP drive • 16" x 10' Belt Conveyor; Complete With: 3HP drive • (2) Slide type chop saws, each w/ 15HP saw arbor motors; length stops, foot pedals • 16" x 15' Belt Conveyor; Complete With: 3HP drive
CKS RESAW & MERRY-GO-ROUND
 
CKS RESAW
 
2 SAW CHOP SAW SYSTEM
 
2 SAW TRIM SAW
 
2 SAW TRIM SAW
 
RESAW LINE #2
JWM (CKS) 42" Band Resaw; Complete With; Hydraulically driven vertical press rolls; 25HP drive; Infeed & outfeed merry-go-round roll system; Auto Infeed Controls; 7.5HP Hydraulic Support Unit • Klockner Moeller 3 Section MCC, 480V •  9' x 15' 4 Run Transfer Deck; Complete With: 3HP drive • 9' x 15' 4 Run Transfer Deck; Complete With: 3HP drive •  9' x 9' 4 Run Transfer Deck; Complete With: rolltop chain; 3HP drive
RESAW INFEED & UNSCRAMBLER
 
CKS RESAW
 
RESAW & INFEED
 
RESAW
 
3 SECTION MCC
 
CORNELL EDGER
 
VIEW OF MILL
 
TRANSFER DECKS
 
TRANSFERS & CONVEYORS
 
MANY SETS ROLLCASE
 
TRANSFERS & ROLLCASE
 
3 SECTION MCC
 
RESAW INFEED & UNSCRAMBLER
 
GREEN CHAIN
 
GREEN CHAIN
 
GREEN CHAIN
 
 9' x 15' 4 Run Green Chain; Complete With: Rolltop chain; 3HP drive; 8' x 4' 4 run jump chain deck • 9' x 25' 4 Run Green Chain, Complete With: Rolltop chain; 3HP drive • 16" x 20' Belt Conveyor; Complete With: 3HP drive • 24" x 30' Belt Conveyor; Complete With: 3HP drive • 4' x 12' 4 Run Landing Deck; Complete With: 3HP drive • 12' x 6'H 6 run bar type unscrambler; Complete With; 3HP drive • 5' x 10'W 4 Run Transfer Deck; Complete With: 3' 4 run jump deck; board stops; 3HP drive • Cornell 6" x 36" Board Edger, Model MEC; s/n MEC-36-825-593 Bottom arbor; Complete With: 75HP Arbor Motor; (2) Shifting saws; Laser light rack w/ 3 lights; 24" x 12' shifting line bar infeed rollcase; 24" x 15' outfeed rollcase, ea w/ 3HP drive; controls; Feedworks drive; (3) Foot pedals
CORNELL EDGER
 
CORNELL EDGER
3 SECTION MCC
 
Allen Bradley Centerline 5 Section MCC, 480V; Hor. 600 amp, Vert. 300 amp • 24" x 42' Belt Conveyor; c/w 3HP drive • 36" x 18' Double box link chain conveyor; Complete With: dump hopper & metering gate; 3hp Drive
BLOWER
 
CHIP PACK SYSTEM
 
CHIPPER KNIFE GRINDER

CHIP PACK SYSTEM
36" Blower; Complete With: 40HP Motor, tower, and blow pipe • 10" x 10' Belt Conveyor; Complete With: 1HP drive • CKS Chip Pack; Complete With: 36" Slant Disc Chipper, Horizontal feed, top discharge; Complete With: 50HP drive; 3' x 8' chip screen; 3' diameter cyclone; 6" x 8' overs belt conveyor (1HP drive); 20" low pressure blower, w/20HP Motor • Klockner Moeller 3 Section MCC, 480V • Metal catwalking, staircases, etc. throughout mill • (11) Lumber carts
CHIP & WASTE SYSTEMS
Montgomery Blow Hog; Model 18HD40-HZF; S/N 2580; 9" x 18" Throat opening; Complete With: 75HP 460V drive; GE 200 460V amp disconnect; 12" X 18' Vibrating Conveyor; w/1HP motor and Fibergalss Section; MDI MI-85 Metal Detector • Allen-Bradley Centerline 3 Section MCC (2) SMC PLUS 50 & 75HP Soft Starts; (5) Size 1 Starter/disconnects
VIEW OF MILL
 
CURRENT SENSOR
 
WASTE LIVE FLOOR BIN
 
WASTE LIVE FLOOR BIN
 
MONTGOMERY BLOW HOG
 
COE DRY KILNS
Johnson 8,800,000 BTU Boiler: Max. W.P Steam: 15 PSI; Water: 30 PSI; Max water temp 250 degrees F.; Heat Surface - 1002 Square feet; Min SVRC 8016 LB/hour; s/n 9584-01 • Industrial Combustion Controls, Model MLAG-84P; S/N 36389-1; Fireeye Flame Monitor • Eco Water Systems Water Softener, (2) pumps and holding tank; Blowback tank • (8) 25HP fans • COE controls • Allen-Bradley 1 & 2 Section MCC's • (25) 4 Wheel Kiln Carts; 50" x 9'; Wheel centers 72" • (19) 8' x 9' 8 Wheel Kiln Carts; Wheel centers 72" • (21) 6'2" x 9' 4 Wheel Kiln Carts; Wheel Centers 72" • (16) New Spare 2 Wheel Kiln Cart End Trucks
JOHNSON 8,800,000 BTU BOILER
 
DRY KILN CONTROLS
DRY KILN CONTROLS
 
DRY KILN ROOFS
 
DRY KILN ROOFS
 
1 OF 8 KILN FANS
 
DRY KILN CONTROLS
 
DRY KILN CARTS
 
GENERAL EQUIPMENT
Mattison 229 5 Head Moulder; Heads: 20HP Top; (2) 10HP Side; 25HP Bottom; (all 3,500 RPM 224/440V) 15HP Feed Rolls • Tri-State Machinery; Air Jump Chop Saw; Model T510-4L, c/w infeed/outfeed table w/ length stops; 7.5HP motor • Young Chang High Speed Spindle Shaper; Model B-13; s/n 066803 • Sweed Scrap Chopper, Model 450-AB, 110/208/230V; c/w wheeled drum cart • Rice Lake 10,000 Lb Platform Scale, Model 4 x 6 HP10K; s'n 92 0606; 4' x 6' platform; Digital readout
MATTISON 227 5 HEAD MOULDER
 
PRECISION AIR JUMP SAW
MOTORS, GRINDERS DRIVES, ELECTRICS
 
HYDRAULIC SUPPORT UNIT
 
HYDRAULIC POWER UNIT
 
SPINDLE SHAPER
 
Spare Motors: 75HP 460V 900RPM; 40HP 460V 1200RPM; 100HP 460V 1200RPM; 40HP 1800RPM; 15HP 1200RPM; 3HP Drive • Siemens 75KVA Transformer, 480/208/120V • (5) Sandpiper air powered double diaphragm pumps • Spare cutter heads • Yale Powell Electric Pallet Jack • Staff lockers
SHOP TOOLS & EQUIPMENT
Ridgid 300-T2 Threader • Electrical & hydraulic parts & hoses • Hand, power & air tools • Mill Teck cable
TERMS OF SALE
PAYMENT: Full payment - day of the sale by Wire Transfer, Visa, Mastercard or Company Cheque accompanied by bank letter guaranteeing payment on presentation. No personal cheques. Full payment must be made before removal of purchase. 10% Buyer's Premium at this sale. 2% surcharge for credit card purchases. All items in auction subject to additions & deletions. REMOVAL: Small tools day of sale. Equipment no later than 4 PM Friday, September 30, 2005. Everything is sold "as is, where is." All Sales Final. While quantities and descriptions are believed to be accurate, the auctioneers, owners, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period.
CONTACT INFORMATION
For addional information and viewing appointments contact:
Ken Ardiel at Tradewest: Tel. (604) 530-9351
  Fax (604) 530-0194
  email: kardiel@tradewestsales.com
Auction Site: Tel. (253) 404-1030
  Fax (253) 404-0270
  email: sales@tradewestsales.com

Back To Top