WOODLAND FOREST PRODUCTS LTD.

(Finger Jointing Division)

RIP/SPLITTER LINE:

Coastal L-S-08-95 Splitter/Rip Saw; 50HP; 2" x 20" Cap.; 575V • Advance 5 Run Package Breakdown, 15' x 15'; w/ 15' Hydraulic Tilt hoist, (4) 52" arms, 7'2" package height • Stick belt, 10" x 23' • Advance 15HP Hydraulic Power Unit • 10 HP Hydraulic Power Unit • 6 Run Landing Deck, 18'W x 18'L • 6 Run Infeed Transfer, 18'W x 6'9"L • Wagner 683 moisture meter, w/ sensor & Graco Sprayer • Outfeed Belt, 18" x 17' trough w/ (1) 8" x 15' belt conveyor, & 8" x 42" conveyor, w/ end rolls (no belt); 3HP; 3' air jump slide • Outfeed Jump Belt Conveyor; 8" x 21'6" • Operator consoles.

OPTIMIZING CHOP LINE:

(2) 1995 Dimter 304L Opticut Auto Chop Lines, scanner & chop section; Right & Left hand operations; w/ 25' 10" X 25' transfer w/ 4 holddown rolls; Dimter Outfeed Belt, 10" x 40', 5 air kickers • Dimter 4 Run Green Chain, 5' x 30' • Infeed Line: Landing Table, 6'L x 20'W; H78B camelback chain; steel deck • 5 Run Transfer Deck, 15'W x 24'L; Partial steel deck • 5 Run Transfer Deck, 15'W x 10'L;  Partial steel deck • Landing Table, 6'L x 15'W; H78B camelback chain • 5 Run Transfer Deck, 33'L x 15'W • 5 Run Transfer Deck, 18'7"L x 15'W • 15 Roll Infeed Rollcase, 12" x 18' • 17 Roll Infeed Rollcase, 12" x 22';  incl. (5) spiral rolls • 14 Roll Infeed Rollcase, 12" x 18' • 28 Roll Infeed Rollcase, 12" x 40'; incl. (8) spiral rolls • Mid-Oregon 7 Run Infeed Transfer, 14'L x 18'W; Plastic chain; steel Decks; WEG/Flender 2HP gear drives; Top & bottom pinch infeed rolls • Mid-Oregon 7 Run Infeed Transfer, 9'L x 18'W; Plastic chain; steel Decks; WEG/Flender 2HP gear drives; Top & bottom pinch infeed rolls • (2) FAC 10HP Hydraulic Power Units; 1500PSI; 45 Gal Reservoir.

FINGER JOINTER LINE:

Industrial 3870 HD FJA-16 Finger Jointer, 28' trim press; manual corner; Capacities:  Max 2" x 8" x 36" blocks; Min. Block size 7" • 9 Run Finger Jointer outfeed transfer, 28'W x 18'L • Return Belt Conveyor, 9" x 41' • Belt Conveyor, 18" x 39' • 4 Run Camelback Outfeed Transfer, 10'8"W x 16'L.

BLACK SORT BINS & TRANSFERS:

(3) Linden Hydraulic Live Floor Block Bins, 6' x 42'; 6' x 40'; 6' x 38' • Chevron Bin Feed Belt Conveyor, 20" x 24' • Outfeed Jump Belt Conveyor, 20" x 18’ • Chevron Bin Feed Belt Conveyor, 20" x 12' • Block Dump Feed Hopper • Incline Belt conveyor from dump box, 30" x 48' • Belt conveyor, 30" x 30' • Incline Belt conveyor, 44" x 16' • Belt conveyor, 10" x 17' • Infeed Flat Belt Conveyor, 18" x 21', w/ 2HP gear drive • Del Schneider 25/5HP Hydraulic Power Unit; c/w Thermal Transfer Heat Exchanger •  Allen-Bradley PLC Unit & Enclosure.

PLANER/TRIM LINE:

Stetson-Ross 6-10-A1 Planer, 8" x 15"; 25HP head drives; 7 heads incl. Splitter head • Infeed Roll System, 24" x 19' Rollcase, w/ (8) 7" rolls, & 2 roll holddown rolls • Advance 10' x 8,000LB Hydraulic tilt hoist, w/ 4 run package; breakdown, 9' x 14'3"; 52" arms; 6' package height • Stick recovery belt, 10" x 14' • 4 Run Landing Deck, 10'  x 10' & 3 Run infeed transfer, 5' x 10'W • 5 Run Trim Saw Infeed Landing Table, 7' x 10'W H78 Camelback • 4 Run Decline Transfer, 10' x 10' • 2 Saw Overhead Variable P.E.T. Trim Saw, 12"; w/ 5 run 10'  x 30' lugged throughfeed transfer • Incline Waste Belt Conveyor, 10" x 20', w/ 2HP & Holroyd reducer • 2 Roller Run Outfeed transfer, 9'L x 4'W; w/ Air bag drop stacking section • (2) PLC Units • Operator Consoles.

CHIPPING & DUST COLLECTION:

1995 Bruks 602CS 24" Drum Chipper, 75HP; s/n 23030; side feed, 22" x 11'8"H; bottom discharge, 14.13" x 14.38"; 870RPM • BM&M 3' x 8' Double Chip Screen, s/n 2325; w/ 5HP 575V drive; c/w (2) spare screens • Edem 20' Balanced Vibrating Conveyor, w/ drive • MDI CR-85 Metal Detector, control, magnet & fiberglass section • 1996 Peerless 30 Unit Chip Bin; Hydraulic clamshell gates • (11) Chipper Knives.
Infeeds:  Waste Re-entry Bin, w/ 6' x 7'L Belt Conveyor; SM-Cyclo 1/2HP drive; 1.16 RPM; Ratio 1505 • Belt Conveyor, 9" x 13' • Belt Conveyor, 12" x 35' • Belt Conveyor, 10" x 44' • Belt Conveyor, 10" x 8' • Incline Belt Conveyor, 24" x 23' • Incline Overs Belt Conveyor, 10" x 65' • Incline Box Chain Conveyor to • Peerless Chip Bin, 12" x 100' • 15 HP Hydraulic Power Unit • Moldow 4,000CFM dust collection system, 20HP blowers.

ELECTRICS:

Note:  Plant transfers & conveyors are powered by (49) as new WEG/Flender Gear drives, 2HP – 7.5HP, which will be sold separately from transfers & conveyors.

Allen-Bradley Centerline 7 section MCC; 30 switches; 1200 amp horizontal; 300 amp vertical • Allen-Bradley Centerline 4 section Centerline MCC; 20 switches; 1200 amp vert/300A Hor. • Allen-Bradley Centerline 3 section Centerline MCC; 17 switches • Allen-Bradley Centerline 2 Section MCC, 9 switches; 600VAC • Allen-Bradley 2 section MCC, 9 switches • (7) Baldor Dynamic Brake Units • Baldor Solid State Starter, PN MA8080GF & Drycap Univar 30KVA Capacitor • Baldor H2 Inverter Drive VFD, Cat # IHH540E; 3HP 600VAC • Baldor Adjustable Speed Drive; Cat # ID15H510E; 3HP 575V • Beaver 6KVA Transformer, 600-460V • Marcus 3 KVA transformer, 600-480/240V; w/ Capacitor • Teck Cable throughout building • Pallet of Electric Motors; 5 HP, 1 HP, 1/2 HP, 7 1/2 HP, 1/2 HP, 1/3 HP, 3 HP • Pallet of Electric Motors; 1/2 HP, 7.5 HP, 5 HP, 3 HP • Pallet of Electric Motors; 5 HP, 20 HP, 7.5 HP, 20 HP.

COMPRESSORS:

Quincy QSI-370 75HP Compressor, Model QSI-370ANA413 • Compair Air Dryer, Model, SCM-250, Smart Cycle; 200PSI, 230V; s/n 91-63456.

GRINDING:

Nielsen 800 Profile Grinder • Volmer 36" Knife Grinder, Magnetic bed • Saturn HKS600 Grinder • AccuLab VI-1200 Digital Scale • Baldor double grinder • Safety Kleen 17.4 Parts Washer • Nielsen 8-14 Setup stand • (4) Finger joint heads • (4) 8 Knife planer Heads, 2-1/4” x 9” • Planer Top & Bottom Splitter Heads • (4) Jet Super Chop 14” Abrasive Cut-off saw wheels • (2) Wanner grease guns • More...

GENERAL:

(2) Precision 28LH & 28RH Up Acting Chop Saws, 7.5HP • Sweed 400 Scrap Chopper • 9' Lumber test bench w/ Enerpac 1,000PSI hydraulic power pack • Binks Pressure Vessel & Pump • Test Oven & Honeywell controls • (9) EZY-Dump Forklift Bins • Stick racks • Lumber Carts • Power, Air & Hand Tools, drivers, staple & nail guns, Angle grinders, drills, Tool Boxes, Bar Clamps, Cordless tools, Tiger torch, Lemmer pressure pot, New work gloves • Strapping Tools, etc.; Lumber wrap stations  • Inventory:  Chevron Delo Grease, Lube tubes, Rust-Oleum • Lifts of 2 x 6 Rough Lumber, etc.

FORKLIFT:

Toyota 30 6,000LB Forklift, LPG, 171” 3 stage full free mast • Forklift Mini Boom • Forklift Fork Extensions.