Complete Sawmill & Planer Mill


NAGAARD SAWMILL LTD.


AUCTION CANCELLED- MILL SOLD IN ITS ENTIRETY



NAGAARD SAWMILL LTD

PRELIMINARY LISTING





DEBARKER LINE


  • 6 Strand Log infeed, 25' x 21'
  • Log infeed Conveyor; 12" x 60'; Box Chain
  • Rosser Head 36' Debarker; Flying head
  • Cambio 30" Ring Debarker
  • 7 Hourglass Roll Outfeed, 27'L
  • Barko Grapple Loader
  • Electrics Room
  • Swing Hammer Hog, 125HP


Head Saw Line

  • Log Infeed Deck; 17'W x 18'L
  • 6 Bunk Log Carriage
  • 52" Head Saw w/ 32" Top Saw, Hydraulic Feed & Setworks, 6 Bunk Carriage, 4’ x 26’ Log
  • Control Booth
  • 100HP Bottom , 230/460V
  • 7.5HP Hydraulic Power Unit
  • Outfeed Spiral Rollcase, 30'L
  • Incline 6 Strand C/B Cross Transfer to Twin
  • Tools, Jockey Grinder
  • 4 Strand Infeed Transfer, 13' x 18'
  • Powered Rollcase, 36" x 27'L, SM-Cyclo Drive
  • 6 Strand Jump Chain, 3'L x 15'W, to
  • 4 Strand Jump Chain, 36" Rollcase Infeed to Albany


Twin Bandmill Line

  • 5 Strand Transfer, 7' x 12'
  • Albany 5' Twin Band Mill; (2) 125HP 230/460V
  • Control Booth for Albany, Albany PLC, Controls
  • Return Belt, 16" x 7'
  • Bandmill Outfeed Rollcase, 36" x 25'; w/ Sweep
  • 9 Strand Incline Transfer; 18' x 20'
  • 4 Strand Bar Type Unscrambler, 18' x 3'
  • 7 Strand Landing Table; 18' x 3';
  • 5 Strand Lugged Trim Table; 18' x 10'; (2) 0 Saws
  • Trim Saw PLC
  • 3 Belt Decline Transfer; 12' x 9'
  • 4 Strand Green Chain; Nylon Rollers; 12' x 62'
  • (6) 19' Rolloffs
  • (10) 15' Rolloffs
  • 4" Edger; 2 Saws; 1 Shifting; 50HP 230/460V; Moving Line Bar, Temposonics Optimization
  • 7.5HP Hydraulic Power Unit; 208/220/440V
  • Edger Control Panel, York J300 Variable Speed Drive
  • 3 Strand Bar Type Unscrambler
  • Transfers


Chipping

  • Edem 24” x 50' Vibrating Conveyor
  • Nicholson 66" Chipper; 4 Knife, (2) 150HP Motors, Soft Start
  • Dillon 5’ x 14’ Chip Screen
  • Incline Chain
  • Shavings Bin
  • Chip Bin, 4 Strand Live Floor
  • Softac Chipper Soft Start
  • MDI Metal Detector
  • Allen Bradley 3 Section MCC
  • Waste Conveyors


Planer Line

  • 4 Strand Package Breakdown, 15' x 21'
  • 4 Arm Tilt Hoist
  • 5 Strand Plastic Cap Chain Transfer; 15' x 15'
  • Trim Table w/ 4 Strand Plastic Cap Chain Transfer; 15' x 17'
  • 6 Strand Plastic Cap Chain Transfer; 15' x 7'; w/ Planer 6 Roll Infeed; w/ Pineapple Roll
  • 30HP Hydraulic Power Unit
  • 25HP Hydraulic Power Unit
  • Yates A66 Planer, 6x12
  • Electrics
  • Coffing Hoist
  • Planer Outfeed Belt, 16" x 10'
  • 6 Strand Plastic Cap Chain Transfer; 18' x 18'
  • Unscrambler to Transfer to Drop Belts
  • Sweed Roll, Rubber
  • Resaw Outfeed Belt; 16" x 25'
  • Turner Vertical Resaw, Model K714
  • 2 Head Hula Saw System
  • 4 Strand Nylon Roller Green Chain; 15' x 54'
  • (25) Lumber Rolloffs, 15'L
  • Armstrong 2SRH Band Saw Sharpener
  • Bandsaw Blades
  • Blower
  • Incline Belt
  • Waste Belt, 48" x 24'
  • Waste Belt, 24" x 50'


Package Line

  • 4 Strand Infeed; 18' x 30'
  • 24’ Package Squeeze w/ Guillotine Package Saw Bar
  • Acme Compression Strapper, w/ Metal Head; F7B6.6; s/n A785; 460V
  • 2 Strand Outfeed w/ 27' Stainless Dip Tank
  • 4 Strand Outfeed Transfer; 12' x 30'; w/ slope deck for Run-off;
  • 4 Strand Transfer on Bogies
  • Electrics
  • Twin Band Saw Soft Starts; Softac Digi Start
  • Switches
  • Assorted Mast Bolts


Filing Room

  • Armstrong 6RH Bandsaw Sharpener
  • Armstrong Filing Clamp
  • Thomson Saw Guide B
  • Armstrong #6 Stretcher Rolls
  • (14) Blades, etc.
  • Setup Stand
  • Foley 357 Grinder
  • Cantek JF300 Side Head Grinder
  • Armstrong #16 Circular Saw Sharpener
  • Knife Stock, Blades, Etc.
  • Babbitt Pot, etc.
  • Diehl Flat Knife Grinder
  • Top & Bottom Planer Heads
  • Approx. (40) Planer Side Heads
  • Finger Jointer Heads
  • (3) Pineapple Rolls
  • Hoist
  • Assorted Tools


Compressors

  • Leroy 100HP Screw Compressor; 230/460V
  • Ingersoll-Rand SSR2001 WOA7W 40HP Compressor


Main Electrical Room

  • Marcus 450KVA 600/480 Transformer
  • 600 Amp Main
  • 800 Amp Main
  • 400 Amp Main
  • Visnay Estamat PFC-N Power Unit
  • Eaton Power XL 0G1 Variable Speed Drive


Rolling Stock


  • Kenworth W90 Tipper Truck, Cummins Diesel, 20' Tip Box
  • Cat 155 Forklift; Diesel; Cab; Pneumatic tires; 2 Stage Mast;
  • Hyster H80 Forklift; Pneumatic tires; 2 Stage Mast; LPG
  • Hyster H80 Forklift; Pneumatic tires; 2 Stage Mast; LPG
  • Hyster H80 Forklift; Pneumatic tires; 2 Stage Mast; LPG


Maintenance & Spares

  • Tire Area, Compressor
  • Parts, Cylinders, etc.
  • 20' Sea Can, Insulated; Power
  • Assorted Parts
  • 20' Sea Can,Insulated; Power?
  • Steel Stock
  • Doucet DX-60 Finger Jointer Line; s/n 2001-06-081; New but weathered
  • Shop
  • Unitor 3 PH Welder; Model UW1 350MP Air Arc
  • 20" Cut-off Saw
  • Shurlift LC-30A HD Drill
  • Jacks
  • (2) Blue Bolt Bins & Fittings
  • Bench w/ Tools, Wrenches, etc.
  • Hydraulic Shop Press
  • Oxy-acetylene Set
  • Canada Machinery Corp. Engine Lathe
  • Tooling
  • John Deere 3020 Tractor, 2 x 4; Canopy; PTO; 3 Pt
  • Coll-o-Crimp Super 1 T-420 Hose Crimper & Fittings
  • Hoist
  • Tool Room, Power Tools
  • Parts Room, Bearings, Welding, Oxy-Acetylene
  • Parts Room, Electrical, etc.
  • Mezzanine
  • (6) Chain Saws
  • Banders & Jacks